ABB Millenium 13A Single Pole Switched Socket with LED Black Glass AM23486-BG

Key specifications include a 13A rated current, 250V AC rated voltage, BS 13A socket-outlet configuration, single-pole switching, LED status indication and flush-mounted installation. Its stated dimensions are 35 x 86 x 86 mm, with a face width of 86 mm. The product includes secure terminals for fixed-wiring connections and a matching frame for a coordinated finish.

Single-pole switching disconnects and reconnects the live conductor while the neutral remains connected. This provides convenient local control of the connected appliance. The circuit must still be isolated at the distribution board before installation, inspection or maintenance because operating the socket switch is not a substitute for full electrical isolation.

The integrated LED provides a visible indication of the switch or connected-circuit status, helping users confirm operation at a glance. The exact illumination behaviour should be checked against the ABB wiring diagram supplied with the product, as indicator configurations can vary between socket models.

Its 250V AC rating and BS 13A outlet format are relevant to the nominal 230V, 50Hz supply and Type G plug system commonly used in the UAE. Suitability must also be confirmed against the approved project specification and the requirements of the relevant local authority, such as DEWA, ADDC or the applicable emirate-level regulator. Required product approvals and certificates should be verified before project submission or installation.

It is intended for indoor fixed electrical installations such as villas, apartments, offices, hotel rooms, reception areas, meeting rooms and premium retail interiors. The black glass finish is particularly suitable for contemporary fit-outs where electrical accessories must coordinate with dark wall finishes, joinery or other ABB Millenium devices.

The connected load must remain within the socket's 13A, 250V AC rating and the capacity of the final circuit. Actual suitability depends on the appliance load, cable size, protective device, circuit design, ambient conditions and local regulations. Permanently connected or higher-power equipment may require a dedicated circuit, double-pole isolator or fused connection unit rather than a standard 13A socket.

The socket is designed for flush mounting, with the fixed wiring and mounting box concealed behind the finished wall. A qualified electrician should isolate and prove the circuit dead, verify the mounting-box size and depth, terminate live, neutral and earth conductors at the marked terminals, tighten connections to ABB's specified torque, secure the mechanism and frame, and then complete continuity, polarity, insulation-resistance and functional tests before energising.

Use a compatible flush box that accommodates the 86 x 86 mm accessory format, the stated 35 mm product depth, cable bends and terminal clearances. The precise box specification should be confirmed from ABB installation documentation before civil or gypsum-board openings are completed. On construction projects, electrical and interior-fit-out teams should coordinate box alignment, finished wall thickness and tile or cladding levels to achieve a level, gap-free installation.

Yes. A BS 13A socket outlet must be connected to the circuit protective conductor through its designated earth terminal. The electrician should verify earth continuity, polarity and the effectiveness of the protective measures before the circuit is placed into service. The socket must never be installed on an unearthed circuit.

The supplied information does not state an IP weatherproof rating, so it should not be assumed suitable for exposed outdoor, wet or dusty locations. Bathroom installation is subject to electrical zones, required ingress protection and local regulations. For gardens, balconies, construction areas or other exposed locations, use a purpose-designed weatherproof socket with an appropriate IP rating and required RCD protection.

Protection must be selected by a qualified electrical designer or electrician according to the circuit arrangement, cable size, installation method, prospective fault current and applicable UAE authority requirements. The final circuit should have correctly rated overcurrent and earth-leakage protection. A 13A socket rating does not by itself determine the required MCB or RCBO rating.

Yes, the black glass face offers a premium appearance for high-end residential, hospitality and commercial fit-outs. It should be protected from cement slurry, paint, tile adhesive, abrasive dust and impact during construction. Install the final decorative frame after heavy finishing work where practical, and use only a soft, lightly damp cloth for routine cleaning.

Testing should include protective-conductor continuity, insulation resistance, polarity, terminal security, protective-device operation and functional checks of the socket switch and LED. The faceplate should be level, firmly mounted and free from damage or gaps. Project handover records should identify the supplying circuit and include test results, product documentation and approvals where required.

Keep the glass surface clean with a soft, non-abrasive cloth and avoid solvents or harsh chemicals. Periodically inspect for cracks, discoloration, unusual heat, buzzing, loose plug retention or intermittent LED operation. If any defect is found, stop using the outlet and have the circuit isolated and inspected by a qualified electrician; internal terminals should not be accessed by the user.