ABB Millenium 13A Single Pole Switched Socket with LED White Glass AM23486-WG

Yes, its BS-type 13A socket format and 250V AC rating are commonly used in UAE residential and commercial projects. Installation must follow the applicable UAE electrical regulations, the requirements of the relevant local authority such as DEWA, ADDC or SEWA, and the project's approved specifications. A licensed electrician should confirm circuit protection, earthing, polarity and compatibility before energising it.

Single-pole switching means that the socket switch disconnects the live conductor while neutral remains connected. This provides convenient local control of the connected appliance but should not be treated as complete electrical isolation. The circuit must be isolated at the distribution board before installation, maintenance or terminal access.

The integrated LED provides a clear visual indication of the socket or connected-circuit status, subject to the product's wiring configuration. This is useful in homes, offices, hotel rooms and commercial interiors where users need to identify quickly whether power is switched on.

The outlet is intended for compatible BS 1363-type fused 13A plugs. It may be used for suitable indoor appliances and equipment provided the connected load does not exceed the socket's 13A rating or the circuit design capacity. High-load or permanently connected equipment should be assessed by an electrical engineer rather than connected solely on the basis of plug compatibility.

The socket is designed for flush mounting with concealed fixed wiring. A qualified electrician should isolate and verify the circuit as dead, prepare a compatible wall box, terminate live, neutral and earth conductors at the correctly marked terminals, secure the mechanism without trapping cables, fit the matching frame and test the completed installation. Always follow ABB instructions and approved project drawings.

The face dimensions are approximately 86 x 86 mm, and the stated product depth is 35 mm. The installer should select a compatible flush box with sufficient internal depth for the mechanism, conductor bend radius and secure terminations. Final box selection should be confirmed against the ABB Millenium mounting system, frame configuration and wall build-up before civil or fit-out work is completed.

Yes, it can be incorporated into common UAE construction systems when a compatible flush box and suitable fixing method are used. For drywall partitions, the box must be firmly supported and coordinated with the board thickness. For blockwork or concrete walls, the box should be correctly aligned and protected during plastering, tiling or finishing so the completed socket sits level with the final surface.

The socket must be supplied by a correctly designed circuit with suitable overcurrent protection, effective earthing and any required residual-current protection. Cable size, breaker rating, circuit arrangement and RCD or RCBO selection must be determined according to the connected load, installation method, local authority regulations and approved electrical design. The socket's 13A rating does not replace circuit-level protection.

This model should be treated as an indoor flush-mounted socket unless ABB documentation confirms a specific ingress-protection rating. In kitchens, bathrooms, balconies, utility areas or other locations exposed to moisture, dust or splashing, installation zones and IP requirements must be checked. Use a suitably rated weatherproof or moisture-resistant outlet where environmental protection is required.

Contractors should verify the model number AM23486-WG, 13A and 250V AC rating, single-pole switching requirement, BS 13A plug format, LED function, white glass finish, 1-gang arrangement, compatible mounting frame and back-box depth. It is also important to confirm quantities, approved-material schedules, authority requirements and coordination with wall finishes and electrical drawings.

Keep the socket and decorative glass components in their original packaging until dusty or wet trades are complete. Prevent contact with plaster, grout, paint, cement residue and abrasive tools. After installation, clean the surface with a soft, lightly damp cloth and avoid solvents or abrasive cleaners that could damage the finish or markings.

A qualified electrician should check conductor identification, terminal tightness, earth continuity, insulation resistance, polarity, protective-device operation and functional switching. The LED indication and socket output should also be verified under safe test conditions. Results should be recorded as required by the project's inspection and testing procedure and the relevant UAE authority.

The ABB Millenium AM23486-WG combines a standard 13A socket format with local switching, LED status indication, concealed wiring and a premium white glass appearance. It is well suited to modern UAE villas, apartments, offices, hotels and commercial fit-outs where electrical functionality, coordinated finishes and a clean flush-mounted installation are important.