ABB Millenium Shaver Socket Outlet Antique Gold AM40188-AG

The AM40188-AG combines a dedicated shaver connection with concealed flush installation, secure fixed-wiring terminals and an antique gold decorative finish. It is particularly relevant to UAE villas, hotels and upscale apartment projects where electrical accessories must coordinate with premium bathroom hardware and interior finishes. Specifying matching ABB Millenium components throughout the project can also provide a more consistent visual result.

The supplied product data lists overall dimensions of 42 x 95 x 190 mm and a width of 95 mm. Because recess dimensions, mounting-box depth and frame dimensions may differ from the overall product or packaging dimensions, installers should check the latest ABB dimensional drawing and physically coordinate the accessory with the selected back box before wall cutting, tiling or joinery work.

Isolate the electrical supply before maintenance and wipe the visible surface with a soft, dry or lightly damp cloth. Avoid abrasive pads, metal polish, bleach, solvents and strong acidic or alkaline cleaners, as these may damage or discolour the decorative finish. Do not spray cleaning liquid directly into the outlet, and arrange inspection by a qualified electrician if the accessory becomes loose, damaged, overheated or contaminated by water.

A shaver socket should not be treated as a general-purpose power outlet. Do not use it for hair dryers, hair straighteners, vacuum cleaners, heaters, kettles, construction tools, extension leads or other high-load equipment. Connect only appliances that match the socket format, voltage and rated output shown on the installed product, and never exceed the manufacturer's stated electrical limits.

The available specification describes it as an indoor fixed-wiring accessory and does not provide an outdoor or wet-area IP rating. It should therefore not be installed outdoors, in exposed garden areas or where it may receive direct water spray unless ABB documentation confirms the required environmental protection. For damp or exposed locations, select an enclosure and accessory with an IP rating approved for the site conditions.

The installation should follow the latest regulations of the relevant UAE authority, the approved project drawings and applicable standards for low-voltage and bathroom installations. Depending on the emirate and project, this may include requirements issued by DEWA, ADDC or TAQA Distribution, SEWA or another authority having jurisdiction. Correct circuit protection, RCD protection where required, earthing, conductor sizing, isolation, bathroom zoning and inspection must be confirmed by the project's qualified electrical professional.

Flush mounting conceals permanent wiring and most of the mechanism behind the finished wall, creating a neat surface that suits modern UAE villas, apartments and hotel interiors. It also helps coordinate the outlet with tiled bathroom walls and matching ABB Millenium switches and accessories. The recessed box depth and final tile or wall finish must be allowed for during first-fix construction to prevent misalignment at second fix.

Yes, the mechanism is intended to coordinate with a compatible ABB Millenium frame and associated accessories to complete the installation. Confirm the exact frame reference, module arrangement, mounting box and antique gold finish compatibility before procurement. Using matched system components helps achieve correct alignment, secure fixing and a consistent finish across the electrical accessory schedule.

Contractors should verify the model number AM40188-AG, 230V AC supply compatibility, flush-box and frame compatibility, wall build-up, cable entry, circuit protection, bathroom-zone requirements and the approved antique gold finish schedule. They should also confirm whether the project specification requires particular IP protection, an isolating transformer, a specific socket configuration or other safety features, as these details are not fully stated in the supplied product information.

The outlet is designed for flush mounting, with the fixed wiring and mounting box concealed behind the finished wall. Installation generally involves isolating and verifying the circuit as de-energised, preparing a compatible recessed box, terminating conductors according to the ABB wiring diagram, securing the mechanism, fitting the compatible Millenium frame and testing the completed circuit. Installation and commissioning must be carried out by a qualified electrician; the manufacturer's instructions take priority over general guidance.

It may be suitable when installed in a permitted bathroom location and as part of a compliant electrical design. Suitability depends on the applicable bathroom zone, required ingress protection, protective device arrangement, earthing and local authority requirements. Because an IP rating is not provided in the listed product data, a qualified electrical engineer or contractor should confirm its permitted location before installation and keep it away from direct water spray unless ABB documentation expressly approves otherwise.

This outlet is intended for fixed indoor installations where a dedicated shaver connection is required, including villa bathrooms, hotel guest bathrooms, serviced apartments, residential developments and premium commercial washrooms. It should be used only for compatible low-power grooming equipment and not as a general-purpose socket for hair dryers, kettles, heaters, power tools or other high-load appliances.

The listed rated supply voltage is 230V AC, which is compatible with the nominal electrical supply commonly used in the UAE. Before connecting a shaver, electric toothbrush charger or similar appliance, verify the appliance input rating and the outlet markings. Do not assume that the outlet supports additional output voltages unless they are clearly marked on the product or confirmed in ABB technical documentation.

The ABB Millenium AM40188-AG is a flush-mounted shaver socket outlet designed for permanent indoor electrical installations. It provides a dedicated connection point for compatible low-load personal grooming appliances and features an antique gold finish that coordinates with ABB Millenium frames and accessories. Its concealed wiring, secure terminals and refined appearance make it suitable for premium residential, hotel and commercial washroom projects.