ABB Millenium Shaver Socket Outlet Dune Sand AM40188-DU

Keep the outlet clean and dry, and wipe the visible surface only with a soft, dry or lightly damp cloth after isolating the circuit where necessary. Do not use abrasive cleaners, solvents or excessive water. If the switch becomes loose, the outlet shows discoloration, there is unusual heat or noise, or the connected appliance operates intermittently, stop using it and arrange inspection by a qualified electrician.

The installation must comply with the requirements of the relevant local authority or utility, the project's approved specifications and applicable electrical wiring regulations. Depending on the emirate and project, this may include requirements from DEWA, ADDC, SEWA or another authority having jurisdiction. A licensed professional should confirm circuit protection, residual-current protection where required, earthing, isolation, bathroom zones and final inspection or testing.

The Dune Sand colour provides a warm, neutral appearance that can complement beige tiles, stone-effect surfaces, timber tones and contemporary bathroom finishes commonly used in UAE interiors. It can also be coordinated with matching ABB Millenium switches, outlets and decorative frames to create a consistent electrical accessory schedule across a project.

Flush mounting conceals permanent wiring and most of the mechanism behind the finished wall, producing a clean appearance suited to modern UAE villas, apartments, hotels and commercial interiors. It also supports coordinated installation with tiled or painted wall finishes. Adequate wall-box depth and careful coordination with the finishing trades are essential for a level installation.

The mechanism is designed to coordinate with compatible ABB Millenium frames and accessories. Confirm the required frame, mounting support and wall box against the project specification and product packaging because these components may be supplied or ordered separately. Using compatible ABB Millenium parts helps achieve correct alignment, secure mounting and a consistent decorative finish.

Contractors should verify the approved electrical drawings, outlet location, bathroom zoning, supply voltage, wall-box compatibility, conductor size, earthing arrangement and required circuit protection. They should also coordinate the installation depth with blockwork, gypsum partitions, tile adhesive and final wall finishes. The selected ABB Millenium frame and adjacent accessories should be confirmed before first-fix and second-fix work begins.

Installation should be completed by a qualified electrician. The supply must first be isolated and verified as dead. A compatible concealed wall box and correctly sized conductors should then be prepared, after which the fixed wiring is terminated securely according to ABB instructions and the approved circuit design. The mechanism is mounted flush, aligned with the finished wall and completed using the appropriate ABB Millenium frame or accessory. Electrical testing must be performed before the circuit is energised.

No. A shaver socket outlet should be used only for compatible shavers and approved low-power grooming equipment within the manufacturer's specified limits. It is not a substitute for a general-purpose socket and should not be used for hair dryers, heaters, kettles, cleaning equipment or other high-load appliances. Always check the appliance plug, voltage and power requirements before connection.

The AM40188-DU is rated for a 230V AC supply and uses a flush-mounted installation arrangement. It features switched local control, terminals for permanent fixed wiring and a Dune Sand decorative finish. The listed product dimensions are 42 x 95 x 190 mm, with a listed width of 95 mm; installers should confirm the actual mechanism, frame and wall-box dimensions before preparing the wall opening.

It may be installed in a bathroom only when its location, circuit protection and wiring arrangement comply with the applicable UAE electrical authority requirements and regulations for wet areas. The electrician must assess bathroom zones, water exposure, earthing, protective devices and the manufacturer's installation instructions before fitting the outlet. It should not be positioned where it may be directly exposed to water unless the complete installation is specifically approved for that location.

This outlet is intended for suitable indoor locations where a dedicated connection for compatible electric shavers or personal grooming appliances is required. Typical applications include residential bathrooms, hotel guest rooms, serviced apartments, villas and selected commercial washroom projects. The connected appliance must be compatible with the outlet configuration and its 230V AC supply.

The ABB Millenium AM40188-DU is a 230V AC, flush-mounted shaver socket outlet designed for permanent indoor fixed-wiring installations. It provides convenient local switched control, secure cable termination and a coordinated Dune Sand finish for use with compatible ABB Millenium frames and accessories.

Keep the outlet clean and dry, and wipe the visible surface only with a soft, dry or lightly damp cloth after isolating the circuit where necessary. Do not use abrasive cleaners, solvents or excessive water. If the switch becomes loose, the outlet shows discoloration, there is unusual heat or noise, or the connected appliance operates intermittently, stop using it and arrange inspection by a qualified electrician.

The installation must comply with the requirements of the relevant local authority or utility, the project's approved specifications and applicable electrical wiring regulations. Depending on the emirate and project, this may include requirements from DEWA, ADDC, SEWA or another authority having jurisdiction. A licensed professional should confirm circuit protection, residual-current protection where required, earthing, isolation, bathroom zones and final inspection or testing.