ABB Millenium Shaver Socket Outlet Matt Gold AM40188-MG

Confirm the model number AM40188-MG, 230V AC supply, shaver socket application, matt gold colour, installation dimensions and flush-mounting requirement. Also verify the compatible ABB Millenium frame, concealed back box, appliance plug and voltage, bathroom-zone suitability, IP requirements and local authority approval. This avoids compatibility issues during electrical installation and final fit-out.

The ABB Millenium AM40188-MG combines a concealed flush-mounted installation with a premium matt gold appearance suited to contemporary UAE villas, hotels and upscale commercial interiors. Its coordinated accessory system supports a consistent finish across an electrical fit-out, while secure fixed-wiring terminals help provide dependable connections when professionally installed.

Disconnect the supply where necessary and wipe the surface with a soft, dry or slightly damp cloth. Do not use abrasive pads, solvents, acidic tile cleaners or harsh chemicals because they may damage the matt gold finish. During construction, protect the accessory from grout, paint, gypsum dust and moisture, and remove protective covering only after dusty and wet trades are complete.

The installation should follow the approved project specifications, ABB instructions and requirements of the relevant UAE electricity authority, such as DEWA, ADDC or the applicable local utility. Depending on the project, BS 7671 or corresponding IEC-based requirements may also apply. Circuit selection, cable sizing, protective devices, earthing, RCD protection and bathroom zoning must be verified by the project consultant or qualified electrical contractor.

No. Use it only with appliances whose plug type, voltage, power demand and intended application are compatible with the outlet and ABB's instructions. Do not connect high-load bathroom appliances, extension leads or general household equipment unless expressly permitted by the manufacturer. Check the appliance rating label before connection.

Yes, the mechanism is designed to coordinate with compatible ABB Millenium frames and accessories. The correct frame, back box and any required mounting components should be checked against the project configuration before ordering. Using coordinated components helps achieve secure fixing, correct alignment and a consistent matt gold finish.

The electrical contractor should coordinate the outlet position, mounting-box depth, conduit route, cable specification and final wall finish before plastering or tiling. Allowance should be made for the mechanism and compatible ABB Millenium frame so the face sits level after completion. Early coordination with architectural, MEP and joinery drawings helps prevent clashes, uneven mounting and tile rework.

Isolate and verify the electrical supply before work begins. Prepare a compatible concealed back box, route the specified conductors, terminate them according to ABB's wiring diagram, secure the mechanism, fit the compatible Millenium frame and check alignment with the finished wall. The circuit must then be inspected and electrically tested before energisation. Installation should be completed by a licensed electrician rather than as a DIY task.

It may be installed in a bathroom only when its position, circuit protection and wiring arrangement comply with the applicable UAE authority requirements and the project electrical design. Bathroom electrical zones, distance from water sources, earthing and residual-current protection must be assessed by a qualified electrician. The product's documented bathroom-zone suitability and IP rating should be confirmed before installation.

The outlet is suitable for indoor residential, hospitality and commercial projects where a dedicated connection for a compatible electric shaver or similar manufacturer-approved grooming appliance is required. Typical applications include villa bathrooms, hotel washrooms, serviced apartments and premium changing facilities. It should not be treated as a general-purpose socket outlet.

This ABB shaver socket outlet has a rated supply voltage of 230V AC and an installation size of approximately 42 x 95 x 190 mm. It is intended for flush mounting with concealed fixed wiring and uses secure terminals for dependable electrical connections. Compatibility with the selected mounting box, frame and connected appliance should be verified before installation.

The ABB Millenium AM40188-MG is a 230V AC shaver socket outlet designed for permanent indoor fixed-wiring installations. It features a matt gold finish, flush-mounted construction, secure cable terminals and styling that coordinates with compatible ABB Millenium frames and electrical accessories.

Confirm the model number AM40188-MG, 230V AC supply, shaver socket application, matt gold colour, installation dimensions and flush-mounting requirement. Also verify the compatible ABB Millenium frame, concealed back box, appliance plug and voltage, bathroom-zone suitability, IP requirements and local authority approval. This avoids compatibility issues during electrical installation and final fit-out.

The ABB Millenium AM40188-MG combines a concealed flush-mounted installation with a premium matt gold appearance suited to contemporary UAE villas, hotels and upscale commercial interiors. Its coordinated accessory system supports a consistent finish across an electrical fit-out, while secure fixed-wiring terminals help provide dependable connections when professionally installed.