ABB Millenium Shaver Socket Outlet Mocha Brown AM40188-MO

Confirm the model number AM40188-MO, mocha brown finish, 230V AC rating, flush-mounted installation type and compatibility with the intended ABB Millenium frame and wall box. For bathroom projects, also verify the current ABB datasheet, IP rating, permitted load, appliance compatibility and consultant or local-authority approval before procurement.

Isolate the electrical supply before maintenance and wipe the faceplate with a soft, dry or lightly damp cloth. Do not use abrasive cleaners, solvents or excessive water. If the outlet becomes loose, overheats, discolours, produces unusual sounds or operates intermittently, stop using it and have it inspected by a qualified electrician.

The mocha brown finish works well with warm timber, stone, bronze and neutral bathroom palettes commonly used in UAE villas, hotels and premium fit-outs. For a consistent appearance, use compatible ABB Millenium frames and accessories from the same finish range and protect visible surfaces during construction.

Connections must follow the terminal markings and ABB installation instructions. A qualified electrician should isolate and prove the circuit dead, prepare conductors without damaging them, tighten terminals to the manufacturer's specified torque and ensure no bare copper is exposed. After installation, the electrician should complete the required continuity, insulation, polarity, earthing and protective-device tests.

Flush mounting keeps permanent cables and terminals concealed behind the wall, creating a neat finish for bathrooms and hospitality interiors. It also helps the mocha brown accessory align with adjacent ABB Millenium switches and outlets, provided compatible frames, boxes and installation depths are used.

The socket mechanism is designed to coordinate with ABB Millenium frames and suitable concealed mounting hardware, but the supplied components can vary by listing or project pack. Confirm whether the decorative frame, support, back box and fixing accessories are included before ordering, especially for bulk construction requirements.

The product data lists dimensions of 42 x 95 x 190 mm and a width of 95 mm. Contractors should confirm whether these are product, faceplate or packaged dimensions and check the required wall-box depth, fixing centres and frame compatibility against the latest ABB dimensional drawing before forming wall openings.

Yes, its 230V AC rating and flush-mounted format make it relevant to many UAE residential, hospitality and commercial fit-out projects. Approval remains subject to the project's electrical specification, consultant requirements and the rules of the relevant authority, such as DEWA, ADDC or the applicable local utility and municipality.

Protection must be selected as part of the complete electrical design. The installer should follow the ABB wiring instructions and applicable UAE regulations for overcurrent protection, residual-current protection and earthing. Do not determine the protective device solely from the outlet's 230V rating; the circuit design, cable capacity and product load rating must also be considered.

Contractors should verify the permitted bathroom zone, required ingress protection, circuit protection, earthing arrangements, cable size, mounting box compatibility and local authority requirements. The selected location must be appropriate for the product's confirmed IP rating and must maintain the required separation from showers, baths, basins and other water sources.

The AM40188-MO is designed for flush mounting, with the wiring and mounting box concealed inside the wall. Installation normally involves isolating the supply, preparing a compatible recessed box, terminating the conductors at the marked terminals, securing the mechanism, fitting the compatible ABB Millenium frame and testing the completed circuit. Installation must be carried out by a qualified electrician.

It should only be used with appliances that fall within the socket's manufacturer-specified output and load rating. Shaver outlets are generally intended for low-power grooming equipment and should not be assumed suitable for hair dryers, heaters, kettles or other high-load appliances. Check the appliance wattage and ABB datasheet before use.

The listed rated voltage is 230V AC, making it suitable for correctly designed UAE low-voltage installations. Before connection, the electrical contractor should confirm the circuit voltage, appliance compatibility, permitted load and all other ratings against the ABB product label and current technical datasheet.

This outlet is suitable for residential bathrooms, hotel guest rooms, serviced apartments, villas, changing rooms and similar indoor locations where a dedicated shaver connection is required. In construction and fit-out projects, its final position must comply with the applicable bathroom electrical zones, project specifications and UAE authority requirements.