ABB Millenium Shaver Socket Outlet Silk Black AM40188-SB

Yes, it can be considered for hotel guestrooms, serviced apartments, staff facilities and other indoor developments requiring a coordinated shaver outlet, provided the electrical consultant approves the specification. For project procurement, verify the outlet configuration, load limitations, mounting accessories, finish schedule and compliance documentation before bulk ordering.

Isolate the electrical supply before inspection or cleaning. Wipe the silk black surface with a soft, dry or lightly damp cloth and avoid solvents, abrasive pads and direct water spray. Arrange professional inspection if the switch feels loose, the faceplate becomes damaged, there is discoloration or heat, or the connected appliance operates intermittently.

After installation, a qualified electrician should carry out the tests required by the applicable UAE authority, approved project specification and relevant wiring rules. These may include protective-conductor continuity, insulation resistance, polarity, circuit protection and functional operation checks. The outlet should be energised only after inspection confirms correct termination, secure mounting and safe circuit performance.

The silk black finish suits contemporary bathrooms, hotel rooms, dressing areas and premium residential interiors. It can coordinate with dark sanitary fittings, black hardware and other ABB Millenium accessories. During construction, the visible surface should be protected from cement, grout, paint, abrasive cleaners and sharp tools to preserve its appearance.

Flush mounting conceals the fixed wiring and most of the mechanism behind the finished wall, creating a clean appearance and reducing exposed projections. It is particularly relevant to UAE villa, apartment, hotel and washroom fit-outs where coordinated electrical accessories form part of the interior design. The mounting box must be positioned accurately before final wall finishes are applied.

The mechanism is designed to coordinate with compatible ABB Millenium frames and accessories, and the matching frame provides the completed installed finish. Confirm whether the frame and mounting components are included or need to be ordered separately. Mixing components from different wiring-accessory ranges is not recommended unless ABB specifically confirms compatibility.

Contractors should confirm the model number AM40188-SB, 230V AC supply compatibility, shaver outlet connector type, required mounting box, wall depth, cable arrangement and compatibility with the selected ABB Millenium frame. The listed overall dimensions are 42 x 95 x 190 mm, but the approved ABB technical drawing should be used to verify installation cut-outs and box requirements.

The unit is designed for flush mounting, with fixed wiring concealed behind the finished wall. Installation generally involves isolating and verifying the circuit, preparing a compatible mounting box, terminating conductors according to ABB instructions, securing the mechanism, fitting the matching frame and completing electrical safety tests. Installation must be performed by a qualified electrician; the circuit should never be energised during fitting.

It is intended for compatible low-load personal grooming appliances such as electric shavers, subject to the outlet rating and connector configuration. It should not be treated as a general-purpose socket for hair dryers, heaters, cleaning equipment or other high-load appliances. Always check the appliance plug, voltage and power requirements before use.

Bathroom installation may be possible only where the selected position and electrical design comply with the bathroom-zone, isolation, earthing and residual-current protection requirements of the relevant UAE authority and project standard. The outlet must not be positioned where direct water exposure is possible. A licensed electrical professional should verify suitability, as requirements can vary between emirates and developments.

The listed rated supply voltage is 230V AC, which is consistent with common low-voltage electrical installations in the UAE. Before connection, the electrician must confirm the circuit voltage, frequency, protective device requirements and appliance compatibility using the product documentation and applicable project specifications.

The ABB Millenium AM40188-SB is a flush-mounted shaver socket outlet designed for permanent indoor electrical installations. It features a silk black finish, local switched control, secure cable terminals and compatibility with coordinating ABB Millenium frames and accessories. It is suitable for residential, hospitality and commercial fit-out projects where a dedicated grooming-appliance connection is required.

Yes, it can be considered for hotel guestrooms, serviced apartments, staff facilities and other indoor developments requiring a coordinated shaver outlet, provided the electrical consultant approves the specification. For project procurement, verify the outlet configuration, load limitations, mounting accessories, finish schedule and compliance documentation before bulk ordering.

Isolate the electrical supply before inspection or cleaning. Wipe the silk black surface with a soft, dry or lightly damp cloth and avoid solvents, abrasive pads and direct water spray. Arrange professional inspection if the switch feels loose, the faceplate becomes damaged, there is discoloration or heat, or the connected appliance operates intermittently.