ABB Millenium Shaver Socket Outlet White Glass AM40188-WG

Confirm the model number AM40188-WG, white glass finish, 230V AC rating, flush-mounted configuration and required ABB Millenium frame or installation accessories. Also verify the outlet format, supported appliance ratings, back-box dimensions and quantities against the consultant-approved material schedule. This helps prevent mismatches during procurement and electrical second-fix work.

It can replace an existing unit only if the supply, circuit protection, wall box, wiring condition, mounting depth, frame system and bathroom location are all compatible. A direct retrofit should not be assumed because accessory dimensions and fixing arrangements can differ between ranges. A qualified electrician should isolate the circuit, inspect the installation and confirm compliance before replacement.

The ABB Millenium AM40188-WG provides a coordinated solution for projects requiring a flush-mounted 230V shaver socket with a premium white glass finish. Its concealed fixed-wiring arrangement, secure termination design and compatibility with the Millenium accessory family support consistent room aesthetics and structured electrical fit-out. Final selection should be based on the approved electrical schedule, load requirements and ABB compatibility documentation.

Isolate the electrical supply before maintenance and wipe the face gently with a soft, dry or lightly damp microfiber cloth. Do not spray cleaner directly onto the outlet or allow moisture to enter the socket or switch mechanism. Avoid abrasive pads, strong solvents and acidic chemicals that could damage the glass finish or surrounding components. Any loose fitting, heat damage, discoloration or intermittent operation should be inspected by a qualified electrician.

Protection must be selected by the electrical designer or qualified installer according to the circuit arrangement, manufacturer instructions, applicable wiring regulations and the relevant UAE authority's requirements. Bathroom circuits may require additional residual-current protection and specific bonding or earthing provisions. The product's voltage rating alone is not sufficient to determine the protective-device specification.

Yes. Its flush profile and white glass appearance make it well suited to premium villas, apartments, hotels, serviced residences and commercial washrooms where coordinated electrical accessories are specified. For hospitality or multi-unit construction, consultants should confirm room standards, maintainability, replacement availability and compatibility with the complete ABB Millenium accessory schedule.

Before first fix, verify the approved bathroom layout, outlet position, wall construction, containment route, back-box size and depth, circuit design and local compliance requirements. Before second fix, confirm cable condition, conductor identification, terminal compatibility, frame alignment and finished-wall tolerances. After installation, complete the required continuity, insulation, polarity, protection and functional tests and record the results in the project handover documentation.

The mechanism is designed to coordinate with the ABB Millenium system, so the correct compatible frame and a back box with adequate dimensions and depth should be confirmed before ordering or wall preparation. Compatibility should not be judged from the face dimensions alone. This is particularly important for blockwork, drywall, joinery and prefabricated bathroom installations where box depth and fixing positions are predetermined.

The unit is designed for flush mounting with fixed wiring concealed behind the finished wall. Installation generally involves isolating and proving the circuit dead, confirming the correct back box and ABB Millenium frame, terminating conductors at the marked terminals, securing the mechanism, fitting the decorative components and completing electrical safety tests. Installation should be performed only by a qualified electrician using ABB's current wiring instructions.

It may be used in a bathroom or washroom only when installed in a permitted location and in accordance with applicable bathroom electrical-zone, circuit-protection and local authority requirements. The product data does not state an IP rating, so it should not be assumed to be splashproof or suitable for wet zones. The installer must assess its distance from basins, showers and baths and follow the approved project design.

This outlet is intended for compatible low-power personal-grooming equipment such as electric shavers and toothbrush chargers, subject to the appliance plug type and the socket's confirmed output rating. It should not be treated as a general-purpose socket for hair dryers, kettles, cleaning machines or other higher-load appliances. Check the ABB product documentation and appliance rating before use.

Yes. Its 230V AC rating is compatible with the nominal low-voltage supply commonly used in the UAE. Installation must still comply with the applicable UAE electrical regulations, project specifications and requirements of the relevant authority, such as DEWA, ADDC or the local electricity distribution company. A UAE-licensed or otherwise suitably qualified electrician should confirm circuit protection, earthing and bathroom location compliance.

Key specifications include a rated supply voltage of 230V AC, a shaver socket outlet connection, flush-mounted installation and a white glass finish. The listed overall dimensions are approximately 42 x 95 x 190 mm. Contractors should verify the installation depth, compatible back box, frame requirements and final cut-out dimensions against the current ABB technical documentation before installation.

The ABB Millenium AM40188-WG is a 230V AC, flush-mounted shaver socket outlet designed for permanent indoor electrical installations. It combines a white glass decorative finish with concealed wiring, secure cable terminals and coordinated ABB Millenium styling, making it suitable for premium residential, hospitality and commercial washroom projects.