ABB Inora Shaver Socket, 115/230V 20VA White BL401

Confirm the required dual-voltage outputs, plug compatibility, electrical ratings, mounting-box dimensions, bathroom-zone location and project approval requirements. The product is identified by SKU 42204-NOS and EAN 6941593453450, which can help contractors verify the correct ABB Inora BL401 white model for procurement and material submittals.

Switch off the circuit before maintenance and wipe the faceplate with a soft, dry or lightly damp cloth. Do not spray water, solvent or abrasive cleaner into the outlet. Periodically inspect the faceplate for cracks, looseness, heat discoloration or unusual noise, and have any suspected fault checked by a qualified electrician.

It should not be treated as an outdoor or weatherproof socket unless ABB documentation confirms the required ingress-protection rating and the installation includes a suitable enclosure. For outdoor washrooms, pool facilities or areas exposed to condensation and water spray, the project engineer should specify equipment with the appropriate IP rating and corrosion resistance.

Yes, provided a compatible mounting box is securely fixed and sufficient depth is available for the socket body and cable terminations. On tiled walls, coordinate the box position before tiling and cut the opening accurately to avoid unsupported edges. In gypsum or partition walls, use an approved box and ensure that the assembly remains rigid and accessible for future maintenance.

The socket should be connected to a correctly designed circuit with suitable overcurrent protection and any residual-current protection required by local regulations and the project specification. Built-in socket protection does not replace circuit-level protection, effective earthing, correct cable sizing or mandatory inspection and testing.

Yes. Its dedicated grooming-appliance outlet, neutral white appearance and dual-voltage functionality make it relevant for hotel rooms, serviced apartments, staff accommodation, villas and residential developments. For commercial projects, the consultant or MEP contractor should confirm that the model meets the approved material submittal, load schedule and local authority requirements.

The listed product dimensions are 55 x 146 x 86 mm. Contractors should verify the mounting orientation, wall-box dimensions, cable-entry space and available wall depth before cutting tiles, closing partitions or ordering back boxes for a bathroom fit-out.

No. Its location must be assessed against bathroom electrical zones and the applicable project or authority requirements. It should be kept away from direct water spray, shower enclosures and positions where water can collect. Because an IP rating is not provided in the listed product information, installers should not assume that the unit is weatherproof or suitable for wet-zone exposure.

First isolate and verify the electrical supply, then prepare the compatible mounting box and route the circuit conductors in accordance with the approved wiring design. Connect line, neutral and earth terminals exactly as shown in the ABB instructions, secure the unit without trapping cables and fit the faceplate level with the finished wall. After installation, a qualified electrician should test polarity, earthing, insulation resistance and protective-device operation before energising the circuit.

This model is intended as a dedicated shaver outlet and is described as incorporating protection against short circuits and overcharging. Shaver sockets commonly use an isolated, limited-power supply for compatible grooming devices; however, the exact isolation arrangement and electrical ratings should be confirmed from the ABB product label or technical datasheet before specification.

Yes, it is suitable for bathroom applications when selected, positioned and installed correctly. In UAE projects, installation should follow the applicable local electricity authority requirements, project specifications and relevant wiring regulations. Bathroom electrical zones, protective measures and the manufacturer's installation instructions must all be observed.

The ABB Inora BL401 Shaver Socket provides a dedicated, safe charging outlet specifically for electric shavers. It is designed to complement bathroom aesthetics while offering convenient, reliable power with dual-voltage capability for worldwide use.

Yes, the ABB Inora BL401 is specified with dual-voltage capability for compatible shavers used with different supply standards. Before connecting a device, check the voltage marking on the socket and the appliance rating. The selected output must match the shaver manufacturer's requirements.

The ABB Inora BL401 is a dedicated bathroom shaver socket designed to provide a convenient power connection for compatible electric shavers and similar low-power grooming devices. It features a modern white finish, dual-voltage capability and built-in electrical protection, making it suitable for residential, hotel and hospitality bathroom projects.