Aquatherm 25mm PPR Gate Valve

Size: 25mm. Material: high-quality PPR. Features include corrosion resistance, the ability to withstand temperature changes, ease of installation, and a design aimed at reliable sealing and maintenance simplicity.

Typical installation steps: (1) Cut and square the 25mm PPR pipe ends. (2) Deburr and dry-fit to ensure proper alignment. (3) Use appropriate 25mm PPR connectors/adapters and solvent cement or fusion method as recommended for PPR systems. (4) Insert and secure the valve, ensuring the flow direction is correct. (5) Test for leaks once the system is depressurized and refilled.

It's ideal for residential and commercial plumbing networks, including cold and hot water lines, as well as other PPR piping installations where a reliable shutoff is needed.

Ensure the system is depressurized before installation or maintenance, follow standard PPR installation guidelines, and use compatible fittings. Avoid prolonged exposure to direct sunlight prior to installation, and verify compatibility with potable-water systems if used for drinking water.

Both are designed for 25mm PPR pipelines, but gate valves provide a linear shutoff with a tighter seal in many piping layouts, while ball valves offer quick on/off operation. See the alternative at: https://fepy.com/product/aquatherm-25mm-ppr-ball-valve

Both are gate valves for PPR systems, but they fit different pipe sizes. If you need 32mm piping, consider the 32mm variant. Compare at: https://fepy.com/product/aquatherm-32mm-ppr-gate-valve

They are similar in design and function but sized for different pipe diameters. Choose the 20mm version if your system uses 20mm PPR pipes. Compare at: https://fepy.com/product/aquatherm-20mm-ppr-gate-valve

Regularly inspect for leaks around joints, ensure the handle turns smoothly, and clean any debris from accessible areas. If gaskets or seals are accessible and wear appears evident, replace them using compatible parts per your PPR system guidelines.

This valve is designed for 25mm PPR piping and should be used with compatible PPR connectors/adapters. For mixed-material systems, use appropriate transition fittings approved for PPR and ensure proper installation practices.

The valve is designed to tolerate temperature changes in plumbing environments. It is intended for use with typical hot and cold water PPR systems; always verify system temperature requirements with your installation guidelines.