Aquatherm 32mm X 25mm PPR Reducer Bush

Material: Polypropylene Random Copolymer (PPR). Size reduction: 32mm to 25mm. Temperature rating: up to 95°C. Pressure rating: up to 10 bar. Color: red. Intended for hot and cold water applications and compatible with Aquatherm PPR piping.

Yes. It’s designed for potable water and heating/cooling applications using PPR piping, suitable for residential and commercial installations.

1) Ensure both pipe ends are clean and dry. 2) Verify the 32mm and 25mm ends align with your pipes. 3) Install the reducer bush using the method your PPR system requires (such as fusion, solvent cement, or compression) to seat the 32mm end into the larger pipe and the 25mm end into the smaller pipe. 4) Check that the connections are seated fully and permit any required cure or cooling time per your installation method.

Being a PPR fitting, it’s lighter, corrosion-resistant, and designed to integrate with PPR piping. It avoids metallic galvanic issues and is typically easier to install within plastic piping systems, though metal reducers may offer different temperature or mechanical characteristics.

Use it to convert a 32mm supply line to a 25mm branch line in domestic water runs, to connect appliances, or to adapt a larger PPR main line to a smaller branch line in small commercial or residential piping networks.

Yes. Use with potable water and ensure the material is appropriate for your local codes. Avoid exposing the fitment to heat beyond its 95°C rating and handle with care to prevent damage to the Fittings. Store and install in accordance with standard plumbing safety practices.

If you need other combinations, you can explore these alternatives on Fepy: Aquatherm 32mm x 20mm PPR reducer bush at https://fepy.com/product/aquatherm-32mm-x-20mm-ppr-reducer-bush and Aquatherm 25mm x 20mm PPR reducer bush at https://fepy.com/product/aquatherm-25mm-x-20mm-ppr-reducer-bush.

Confirm that your main run is 32mm OD and your branch line is 25mm OD, and that you’re using Aquatherm-compatible PPR piping. Ensure the connection method (fusion, cement, or compression) matches your system and the reducer’s installation requirements.

Yes, it provides a reliable, corrosion-resistant transition between two pipe sizes with minimal additional fittings, supports up to 95°C and 10 bar, and integrates smoothly with Aquatherm PPR systems, which can contribute to long-term cost savings and simpler installation.

The product is specified as Aquatherm 32mm x 25mm PPR reducer bush, with a 95°C temperature rating and 10 bar pressure rating. For broader context, compare it against other Aquatherm PPR reducers in the same family and ensure your installation method aligns with the PPR system you’re using.