Aquatherm 45Deg PPR Elbow

Specifications: material — polypropylene random copolymer (PPR); size — 20 mm; angle — 45 degrees; designed for potable water piping; UV-stable and corrosion-resistant; suitable for hot and cold water lines in both residential and commercial settings; intended for quick and secure installation with compatible PPR joining methods.

For PPR systems, you typically fuse the elbow to 20 mm PPR pipes using a compatible PPR welding tool, ensuring square cuts and clean deburring. Steps: 1) Cut and deburr the pipe ends squarely. 2) Dry-fit to confirm alignment. 3) Use a PPR fusion tool to heat and join the pipe to the elbow to the recommended insertion depth. 4) Allow the joint to cool and inspect for alignment and leaks. If you use compression fittings instead of fusion, follow the specific fitting instructions and ensure a secure, leak-free connection.

Yes. It is designed for standard 20 mm PPR piping used in potable water systems. To ensure a proper fit, verify that your pipe outside diameter matches 20 mm and use compatible joining methods (fusion or approved fittings) as recommended for PPR systems.

Typical applications include turning piping around corners in water supply lines, retrofitting existing 20 mm PPR networks, and routing hot or cold water in residential or commercial buildings where a precise 45-degree bend is required to avoid kinks and maintain flow efficiency.

This elbow is designed for potable water and is UV-stable and corrosion-resistant, supporting safe, long-term water transmission. Use only with compatible PPR piping and joining tools. Follow local codes and standards for potable water installations, and avoid exposing fittings to chemical solvents or incompatible substances.

For alternatives, you can check other Aquatherm PPR elbows and similar fittings on Fepy to compare angles, sizes, and costs: 1) Aquatherm PPR Elbow 20mm 90deg: https://fepy.com/product/aquatherm-ppr-elbow-20mm-90deg 2) Aquatherm PPR Elbow 25mm 45deg: https://fepy.com/product/aquatherm-ppr-elbow-25mm-45deg 3) PPR Elbow 20mm 45deg (generic): https://fepy.com/product/ppr-elbow-20mm-45deg 4) Aquatherm PPR Elbow 32mm 45deg: https://fepy.com/product/aquatherm-ppr-elbow-32mm-45deg

You’ll typically need a compatible PPR welding tool for fusion joints, along with standard pipe cutting and deburring tools. If you prefer mechanical fittings, use only approved PPR compression fittings designed for 20 mm piping. Have clamps or fixtures handy to hold alignment during joining and perform a leak test after installation.

If you find the Aquatherm 45Deg PPR Elbow unsuitable, you can explore the return option provided by Fepy within the stated return window for unused items in original condition. This allows you to assess value after purchase and swap or refund as per the store’s policy.

First confirm the pipe size is 20 mm. Then verify the connection method (fusion vs. compression) supported by your existing system. After installation, perform a pressure or water-leak test to ensure all joints are watertight. Proper insertion depth and clean, deburred pipe ends are essential for reliable leaks-free performance.

A 45-degree elbow provides a gradual bend, reducing potential pressure losses and allowing smoother flow around corners, which is useful in tight spaces. A 90-degree elbow creates a sharper change in direction and is used when space constraints require a right-angle turn. Choose the angle based on your layout, space, and flow requirements.