زاوية الجدران المصنوعة من الحديد المجلفن سماكة (0.35MM) طول (3M)

Key specs are 0.35 mm thickness, 3 m length, material is galvanized iron, and it is described as corrosion resistant and capable of withstanding extreme weather. The product is said to be fire resistant, easy to cut and shape, and available in various sizes and finishes.

Alternative GI wall angles on Fepy.com include: 0.5 mm X 3 m GI Wall Angle (https://fepy.com/product/gi-wall-angle-0-5mm-3m) which offers greater thickness for heavier loads; 0.35 mm X 2 m GI Wall Angle (https://fepy.com/product/gi-wall-angle-0-35mm-2m) for shorter projects with similar thickness; and 0.3 mm X 3 m GI Wall Angle (https://fepy.com/product/gi-wall-angle-0-3mm-3m) as a lighter option. These provide different lengths and thicknesses to fit varying applications and budgets.

This wall angle is well suited for DIY home improvements, shelving frames, lightweight partitions, mounting brackets, and general framing where a sturdy right-angle support is needed without heavy load requirements.

To install, measure and mark the required length, cut to size using metal shears or tin snips, deburr any sharp edges, and position the angle where needed. Secure with appropriate screws or fasteners for the substrate, ensuring a clean, straight alignment before final tightening.

Wear gloves and eye protection when cutting or handling to avoid sharp edges. Work in a well-ventilated area, keep the material dry to prevent corrosion at damaged coatings, and use proper fasteners that are suitable for the substrate. Handle sheets with care to prevent injuries.

The galvanized coating provides corrosion resistance for outdoor or humid environments. Regular cleaning with mild soap and water helps maintain appearance. If the coating becomes damaged, consider touching up or replacing the affected section to prevent corrosion.

This product is commonly used for light framing and bracing in non-structural or semi-structural applications. For critical structural needs or local code requirements, consult your local regulations and use appropriate standards and fasteners.

The 0.35 mm wall angle is presented as a cost-effective option with easy handling and long service life due to its galvanized coating. When choosing between thicknesses and lengths, consider the load and project requirements to determine overall value for your specific application.

Yes, similar products are offered in different thicknesses and lengths. Availability of specific sizes and finishes varies, so you can select the option that best fits your project needs.

Store in a dry, covered area to protect the coating from moisture. Keep the pieces flat or neatly stacked to prevent bending or damage, and avoid placing heavy objects on top of the metal edges.