مفك و مقابس فك (1/4") مكون من خمس قطع قياس (5x25mm) موديل (GL59255)

The set includes five hex bits, each with a 5 mm hex profile and 25 mm overall length, providing a ready-to-use selection for common 5 mm hex fasteners.

The bits feature S2 steel insert construction, which is heat treated for high torque and durability. They also have a corrosion-resistant coating to resist rust and wear in tough work environments.

These bits are designed for use with any 1/4\" drive tool, including ratchets, drills, and impact drivers, offering broad compatibility across common power and manual tools.

They’re ideal for automotive work (engine bay and chassis fasteners), electrical panel installation and maintenance, and general repairs where 5 mm hex fasteners are encountered.

Ensure the bit seats fully in the fastener, apply steady, even pressure, and use torque appropriate for the fastener size. Avoid side loading or angled engagement, and stop if you notice slippage or rounding.

Yes. Wear eye protection and gloves as needed, keep bits clean and free of debris, avoid using damaged or worn bits, and store them in a dry place to prevent corrosion.

Wipe bits clean after use, inspect for wear or damage, lightly oil them to prevent rust, and store in a dry, organized case or tray to prevent loss and provide quick access.

Compared to similar Fepy offerings, such as SATA GL59250 (https://fepy.com/product/sata-gl59250-5-piece-1-4-drive-hex-bit-set-5x25mm) and SATA GL59260 (https://fepy.com/product/sata-gl59260-6-piece-1-4-drive-hex-bit-set-5x25mm), the GL59255 provides a compact 5-piece selection with a 5 mm hex size and 25 mm length, making it ideal when you need a focused, durable set without extra bits.

Consider the need for a durable, corrosion-resistant 5 mm hex set with 25 mm bits and 1/4\" drive compatibility. If you frequently encounter 5 mm hex fasteners and want a compact, reliable kit, this set offers good value with quality construction and a limited, task-focused selection.

1) Ensure both the drive and bit are clean. 2) Insert the 5 mm hex bit squarely into the drive tool and seat fully. 3) Apply steady pressure and torque as needed. 4) When finished, pull the bit straight out and store it back in the set to prevent loss.