كوع السباكة البلاستيكي (PVC) قياس (1") بزاوية (90Deg) باللون الأبيض

This is a 1-inch diameter PVC pipe elbow that creates a 90-degree turn between two pieces of PVC pipe. It helps route piping around corners in plumbing, irrigation, or DIY projects.

Material: PVC; Finish: White; Size: 1 inch (nominal) diameter; Angle: 90 degrees; Connection type: slip-fit for standard 1" PVC pipe.

Ideal for plumbing, irrigation, drainage, and DIY piping projects where a sharp 90-degree turn is needed in 1" PVC piping.

Steps: cut the pipe square, dry-fit to ensure alignment, clean the pipe ends, apply PVC primer to both the pipe and elbow, apply solvent cement, insert fully, and hold briefly to ensure proper bonding. Allow the joint to cure per the cement manufacturer’s instructions.

Wear gloves and eye protection when handling PVC solvent cement. Work in a well-ventilated area. Avoid skin contact with cement and allow adequate curing time before applying pressure to the joint.

PVC elbows are commonly used for water and irrigation, but always verify that the product is rated for potable water and complies with local codes before using it for drinking water or other regulated fluids.

Here are some nearby options available on Fepy you can compare with this 1" X 90Deg PVC Elbow (sizes and finishes vary): - 1-x-90deg-pvc-elbow-black: https://fepy.com/product/1-x-90deg-pvc-elbow-black - 1-x-45deg-pvc-elbow-white: https://fepy.com/product/1-x-45deg-pvc-elbow-white - 1-1-4-x-90deg-pvc-elbow-white: https://fepy.com/product/1-1-4-x-90deg-pvc-elbow-white - 3-4-x-90deg-pvc-elbow-white: https://fepy.com/product/3-4-x-90deg-pvc-elbow-white - 1-1-2-x-90deg-pvc-elbow-white: https://fepy.com/product/1-1-2-x-90deg-pvc-elbow-white These options differ mainly by pipe size (diameter) and sometimes color, affecting compatibility with your existing piping and the space you have for the turn.

Common variants include 1" X 90Deg in other finishes (e.g., white or colored), and 1" X 45Deg elbows. Examples (urls provided for reference): - 1-x-90deg-pvc-elbow-white: https://fepy.com/product/1-x-90deg-pvc-elbow-white - 1-x-45deg-pvc-elbow-white: https://fepy.com/product/1-x-45deg-pvc-elbow-white

Use PVC primer and a compatible PVC solvent cement rated for 1" PVC piping. Optional items include pipe supports or clamps to secure the elbow and ensure proper alignment during curing.

PVC elbows are generally durable and designed for long-term use in appropriate environments. Inspect joints periodically for any signs of wear or cracking, and avoid exposing the elbow to high heat or harsh chemicals that could degrade PVC over time.

Measure the nominal pipe size you’re replacing or connecting to (1" nominal). Ensure your pipe is compatible with IPS/nominal PVC sizing and that the ends are the same slip-fit type. If in doubt, compare the product’s size and connection type to your current piping or consult Fepy’s product listings for similar items in your size.