شفرة منشار ثنائية المعدن من ساتا قياس (32Tx300mm) مكونة من (100) قطعة موديل (ST93406ME)

32T means 32 teeth per blade. A lower teeth count like 32T allows faster material removal on thin metal, sheet metal, and metal trim, delivering quicker cuts with less tooth clogging. It’s ideal for clean, efficient cuts in thin materials rather than fine finishing.

These blades are described as versatile and suitable for cutting metal, wood, and plastic. The bi-metal construction adds durability for metal cutting, while the blade design still performs adequately on non-metal materials when used appropriately.

Bi-metal blades combine strength and flexibility, which helps resist wear and reduce breakage. Longevity depends on the material being cut, cutting speed, and feed pressure, but the bi-metal build is intended to provide extended life compared with standard carbon blades.

Ensure your saw accepts blades of the 300 mm length and compatible shank. Remove power, then secure the existing blade with the saw’s blade clamp or fastener, insert the new 300 mm blade with the teeth facing forward, and tighten securely before resuming work.

A 300 mm blade with 32T is well-suited for medium to large cuts in thin metal (like 1/8" or thinner), sheet metal, and metal trim. It’s also capable for general-purpose cutting in other materials, but its speed and efficiency are optimized for thinner metal sections.

Here are two similar options you can explore on Fepy to compare with the SATA ST93406ME: - Alternative A: SATA Bi-Metal Saw Blade 32T-300mm — https://fepy.com/product/sata-bi-metal-saw-blade-32t-300mm - Alternative B: SATA Bi-Metal Saw Blade 64T-300mm — https://fepy.com/product/sata-bi-metal-saw-blade-64t-300mm These provide higher or lower tooth counts and can influence cutting speed and finish quality depending on your task.

Yes. Always wear appropriate PPE (eye protection, gloves, and hearing protection as needed). Securely clamp the workpiece, maintain a steady feed rate to avoid blade binding, avoid twisting or twisting the blade, and disconnect power before changing blades. Also ensure the blade is in good condition—no cracks, missing teeth, or bending.

The blades are described as versatile and capable of cutting metal, wood, and plastic. While you can attempt wood or plastic cuts, they’re optimized for metal, so performance and finish may vary for non-metal materials.

After use, inspect blades for wear or damage, wipe off any debris, and store them in a dry, protective case to prevent corrosion or bending. Avoid bending the blade, and use appropriate cooling and feed rates to prolong blade life.

Lower tooth counts like 32T cut faster through thin metal and produce efficient results, while higher tooth counts yield smoother finishes but cut more slowly and can clog with tougher materials. For 1/8" or thinner metal, a 32T blade is typically a good balance of speed and finish; for thicker or tougher materials, consider a higher tooth count option.