وصلة قضيب ملولب من الحديد المجلفن (GI) قياس (10MM)

The 10MM GI Threadbar Connector is a galvanized steel connector designed to join two threaded bars or components with a secure, straight connection. It’s intended for quick, reliable assembly in applications like formwork, scaffolding, or structural bracing where a compact 10 mm size fits into tight spaces.

Key specs include a 10 mm diameter and galvanized steel construction for corrosion resistance. The finish provides outdoor suitability, and the connector is designed for easy use with common tools such as wrenches, pliers, and screwdrivers. It is built for durable, reliable connections in tight spaces.

This connector is well suited for formwork, scaffolding, temporary bracing, fencing, and other structural connections where a compact, corrosion-resistant link between two threadbars is required, especially in outdoor or exposure-prone environments.

Installation steps: 1) Ensure both threadbar ends are clean and cut square. 2) Align the ends with the connector. 3) Thread each bar into the connector on their respective sides. 4) Tighten with an appropriate wrench until secure, verifying the bars are parallel and seated. 5) Check for any misalignment or debris and re-tighten if needed. Do not overtighten to avoid damage.

You’ll typically need an adjustable wrench or socket wrench, pliers, and possibly a screwdriver for any auxiliary fittings. The connector is designed to be used with standard hand tools you likely already have on hand.

Galvanized steel offers enhanced corrosion resistance, helping the connector withstand moisture, humidity, and outdoor exposure. This improves longevity and reduces maintenance for outdoor or harsh environments.

Compared to smaller or larger variants, the 10 mm version balances compactness with strength. For projects requiring even tighter spaces, you might consider an 8 mm variant; for heavier-duty needs, a 12 mm variant may be more appropriate. See the 8mm and 12mm options on Fepy for side-by-side specs and compatibility: 8mm variant: https://fepy.com/product/8mm-gi-threadbar-connector and 12mm variant: https://fepy.com/product/12mm-gi-threadbar-connector.

Choose based on the threadbar size you’re using and the required strength. 8 mm is for lighter-duty or tighter spaces, 10 mm offers a good balance of size and strength, and 12 mm provides higher load capacity for heavier applications. Verify that your project’s threadbar dimensions match the connector’s threading and fit.

Wear appropriate PPE (gloves, eye protection) and ensure tools are in good condition. Verify all connections are clean, properly aligned, and tightened to secure the bars without over-torquing, which can strip threads or deform components. Follow any local codes or project specifications for load and safety requirements.

Regularly inspect for corrosion, deformation, and looseness. Clean any debris from threaded ends before re-assembling, re-tighten as needed, and replace connectors showing signs of rust, wear, or damage. Use galvanized hardware to maintain corrosion resistance over time.

Yes, you can pursue a return if the product doesn’t fit your project or expectations, subject to Fepy’s standard return terms for unused items in original packaging. If you’re unsure about fit or compatibility, consider purchasing multiple options within the return-friendly window to evaluate in practice.

In tight spaces, ensure clean-cut ends and gentle alignment before threading, work from the center outward to prevent binding, and use a slim wrench or tool extensions if needed. Mark alignment references beforehand and confirm both sides seat fully before final tightening to maintain straight, even connections.

Threadbar connectors are designed to match standard threadbar dimensions for compatibility, but always verify the thread pitch and length match your specific bars. If you’re mixing brands, test in a controlled setting first to confirm a secure fit and proper engagement.