10mm X 100mm GI Bolt

Specifications: diameter 10 mm, length 100 mm, material galvanized steel, corrosion‑resistant galvanized coating, and a pre‑drilled hole for easy mounting. The galvanized finish provides rust resistance, making it suitable for outdoor, wet, and coastal environments.

Use the bolt in alignment with a corresponding nut and washer as needed. Ensure the mounting hole or through‑hole is properly matched, insert the bolt, and tighten to the appropriate torque. If needed, use thread‑locking compound to prevent loosening in vibration‑prone applications.

This bolt is designed for outdoor, wet, and coastal environments thanks to its corrosion‑resistant galvanized coating. It performs well in both dry and marine‑adjacent settings where exposure to moisture is common.

Common uses include fastening structural components in construction, securing machinery in industrial settings, automotive assembly, and marine or outdoor installations where a sturdy, rust‑resistant fastener is needed.

Compared to other sizes in the galvanised range, this 10 mm diameter bolt offers a balance of strength and fit for medium‑duty loads. For heavier loads, you might consider a larger diameter like the 12 mm variant, while smaller jobs may suit 8 mm bolts. Examples (all on Fepy): 12mm x 100mm galvanised bolt at https://fepy.com/product/12mm-x-100mm-galvanized-bolt and 8mm x 100mm galvanised bolt at https://fepy.com/product/8mm-x-100mm-galvanized-bolt. If you need a longer bolt, see 10mm x 120mm galvanised bolt at https://fepy.com/product/10mm-x-120mm-galvanized-bolt.

You’ll typically need a suitable wrench or socket to tighten the nut (if used), a washer if required by your mounting hardware, and optionally a torque wrench to ensure proper clamping force. Have penetrating oil or anti‑seize on hand if disassembly is anticipated.

Wear eye protection and gloves when handling and installing to prevent injury from sharp edges. Inspect the bolt for straightness and any coating defects before use. Use correct torque to avoid stripping threads or over‑tightening the mounting surface.

Yes, its corrosion‑resistant galvanised coating makes it suitable for many automotive and marine applications where exposure to moisture occurs. Always verify load requirements and compatibility with other materials to avoid galvanic corrosion.

Yes. Fepy offers related galvanised bolts in multiple sizes to suit different projects. For example, 12mm x 100mm galvanised bolt (https://fepy.com/product/12mm-x-100mm-galvanized-bolt) and 10mm x 120mm galvanised bolt (https://fepy.com/product/10mm-x-120mm-galvanized-bolt) provide longer or wider options, and an 8mm x 100mm galvanised bolt (https://fepy.com/product/8mm-x-100mm-galvanized-bolt) offers a smaller alternative.