نظام ضبط مستويات البلاط دلتا قياس (mm11-20) سماكة (1.5mm) مكون من (100) قطعة

Specifications: 11–20 mm tile compatibility, 1.5 mm strip thickness, white color, 100 pieces per pack, durable plastic, easy to insert and remove, non-slip design to keep tiles stable during installation, and designed to improve tile alignment and finish.

Installation steps: 1) Clean the substrate and ensure it's dry. 2) Place tiles as you normally would, inserting the strip between tiles to maintain spacing and level. 3) Use a level or tile leveling tool to verify flush height. 4) Continue tiling, then remove the strips after grouting has cured. Always follow tile manufacturer guidance for grout cure times.

These strips are typically designed for a single installation per use. If the same tile thickness and grout joint width are required for a future project, you may reuse clean, undamaged strips, but performance is best when used as originally intended.

Use these strips for tile installations where you want to prevent lippage and maintain a consistent grout width, especially with larger or higher-precision projects using tiles in the 11–20 mm thickness range. They’re suitable for floor and wall tiling where levelness is critical.

If you’re exploring alternatives on Fepy.com, you can compare these options: Delta Leveling Wedges (11-20 mm, White, 100 pcs) at https://fepy.com/product/delta-leveling-wedges-11-20mm-white-100pcs, Tile Leveling Strips (9-12 mm, White, 100 pcs) at https://fepy.com/product/tile-leveling-strip-9-12mm-white-100pcs, and Delta Leveling Clips (11-20 mm, 100 pcs) at https://fepy.com/product/delta-leveling-clips-11-20mm-100pcs. Each variant serves similar leveling purposes but differs in recommended tile thickness range and system compatibility.

Yes, these strips are designed for indoor tiling and are made from durable plastic. They’re non-toxic and safe for typical DIY and professional tiling environments. As with any tool, keep away from small children and handle with care to avoid bending or breaking the strips during installation.

If you’re not satisfied, you can return the product within the stated policy window in unused condition. Be sure to keep all packaging and proof of purchase, and follow Fepy’s return instructions to ensure a smooth process.

Absolutely. The Delta Level System Strips are suitable for both professional tilers and DIY enthusiasts. They simplify the leveling process, help achieve a professional finish, and are especially beneficial on larger or more precise tiling projects.

Grouting should follow the tile manufacturer's recommended cure time for the adhesive and grout you’re using. In general, grout is typically applied after the adhesive has set, which is commonly 24–48 hours, but always verify with the product instructions you’re using.

For best results, pair these strips with a tile leveling tool or pliers, a rubber mallet, spacers, and a tile cutter or nippers as needed. Having a level and a soft touch during placement helps ensure a flat, even finish along with consistent grout lines.