حلقة تثبيت (D) قياس (12mm)

The shackle is made from durable steel and features a corrosion-resistant finish to withstand moisture, salt, and harsher environments.

This model is intended for 12mm-sized fittings and is suitable for securing ropes or small-diameter chains. Ensure your attachment points match the 12mm dimension and that the pin threads are clean for proper operation.

8mm shackles are smaller with lower load capacity, 10mm shackles are larger with greater capacity, and the 12mm shackle offers the largest size among them for heavier-duty tasks. For exact specifications, see the 8mm D Shackle at https://fepy.com/product/8mm-d-shackle and the 10mm D Shackle at https://fepy.com/product/10mm-d-shackle.

Ideal for securing ropes and small chains, boat mooring lines, tie-downs for gear, camping setups, and general rigging in outdoor or marine environments.

To install, insert the pin and rotate it by hand until snug. Avoid cross-threading. To remove, back the pin out by hand until the shackle opens and you can separate the load.

Rinse with fresh water after exposure to saltwater, dry thoroughly, and lightly lubricate the pin threads to keep them turning smoothly. Regularly inspect for corrosion, cracks, or deformation.

Never exceed the working load, avoid side-loading, and inspect for wear or damage before each use. Ensure the pin sits fully seated and the load is aligned with the shackle’s body to prevent bending or failure.

Yes, but avoid mixing incompatible metals in saltwater conditions to minimize galvanic corrosion. Prefer compatible or coated hardware and consider regular maintenance in marine settings.

Fepy offers standard returns on unused items in their original packaging within the designated return window; reach out to support if you need to start a return.

It’s designed to secure loads and anchor points. For rigging or lifting, verify the working load limit and ensure it meets the requirements of your task before use.