شبكات الحديد المجلفن (H/D) قياس (15cm) طول (30M)

Size: 15 cm wide by 30 m long. Material: heavy-duty galvanized iron (GI) for strength and rust resistance. Durability: designed to withstand typical construction wear. Installation: flexible and easy to handle. Multipurpose: suitable for reinforcing plaster, masonry, and other wall applications. Coverage: cost-efficient reinforcement for large projects and improves plaster adhesion.

The embedded GI mesh distributes stresses across the plaster surface, enhances adhesion between plaster and wall, and resists movement that causes cracking. This results in a smoother finish and longer-lasting repairs on both new and renovated walls.

Use it to reinforce plaster on interior and exterior walls, repair cracked or deteriorated plaster, reinforce masonry surfaces, and support large-area plastering jobs where added strength and durability are beneficial.

Step-by-step: 1) Clean and prepare the wall surface. 2) Unroll the mesh along the area to be plastered and cut to length. 3) Secure the mesh at the edges with staples or ties, keeping it flat and wrinkle-free. 4) Apply the base coat of plaster so the mesh is fully embedded (about 1–2 mm of plaster over the mesh). 5) Continue with the final plaster coats, ensuring even coverage and a smooth finish.

You’ll typically need a measuring tape, scissors or tin snips to cut the mesh, a staple gun or ties to secure it, a plaster trowel or hawk for applying base coats, and standard personal protective equipment like gloves and safety glasses.

Yes. Wear gloves to protect against sharp edges, handle the roll with care to avoid kinks, work in a well-ventilated area, and keep the mesh dry and stored away from moisture to prevent corrosion of any uncoated edges prior to installation.

Compared to a smaller-width mesh, this 15 cm wide roll covers more area per pass and provides greater reinforcement for large surfaces. For smaller projects or tighter tolerances, you might opt for a narrower GI plaster mesh such as the 12 cm width. See alternatives below for direct product comparisons:

Consider these options available on Fepy.com: 1) GI Plaster Mesh 12cm x 25m — https://fepy.com/product/gi-plaster-mesh-12cm-25m 2) HD GI Plaster Mesh 15cm x 20m — https://fepy.com/product/hd-gi-plaster-mesh-15cm-20m These can be good substitutes depending on wall size and project requirements.

One roll is 15 cm wide by 30 m long, which equals 0.15 m × 30 m = 4.5 square meters of coverage. To estimate rolls needed, calculate your wall area (width × height) in square meters, then divide by 4.5. Round up to ensure complete coverage and account for overlaps or waste.

Yes. The GI plaster mesh is designed to reinforce cementitious plaster systems and can be used with cement-based plasters as well as compatible gypsum-based plasters, providing added strength and improved adhesion across both types.