16 mm x 260 mm Hilti Drill Bit

It's optimized for masonry materials such as concrete and brick, making it suitable for drilling holes for anchors, dowels, bolts, and wiring in masonry walls.

Diameter: 16 mm; Length: 260 mm; Material: high-speed steel (HSS); Shank: standard round shank suitable for most common drills; features a split-point tip and flute geometry designed for efficient debris removal.

The split-point tip reduces walking at the start of the hole, helping you start precisely. The flute design clears debris efficiently, improving hole quality and helping to keep the bit cool during cutting.

The extended 260 mm length enables drilling deeper holes or reaching through thicker materials and into harder-to-reach areas, giving you more versatility on the job.

Use a hammer drill in masonry mode, start at a low speed to establish the hole, then gradually increase speed and pressure. Allow the bit to cut rather than forcing it, and pause to cool if you sense excessive heat.

Drill in short bursts to avoid overheating, keep the bit clean of debris, and use the appropriate drill setting for masonry. If the bit becomes dull, avoid forcing it and switch to a fresh bit to maintain performance.

Wear eye protection, hearing protection if using a loud hammer drill, and gloves. Secure the workpiece, keep hands away from the rotating bit, and avoid loose clothing that could get caught.

For alternatives, consider these comparable options available on Fepy: Bosch 16 mm x 260 mm Masonry Drill Bit (https://fepy.com/product/bosch-16mm-260mm-masonry-drill-bit) and Makita 16 mm x 260 mm HSS Drill Bit (https://fepy.com/product/makita-16mm-260mm-hss-drill-bit). Compare price, material, and durability to find the best value for your project.

Common use cases include drilling holes for anchors or dowels, running electrical conduits, or plumbing lines into concrete or masonry walls and floors where deep, clean holes are required.

This bit is designed for drills with a chuck capable of holding 16 mm diameter bits. Ensure your drill is suitable for masonry work and can safely accommodate a bit of this size and length.

It combines German-made HSS construction with reliable performance and long life. When deciding value, compare the price, expected tool life, and cutting efficiency against similar 16 mm x 260 mm options on Fepy.