محول السباكة نوع ذكر من النحاس (Pex) قياس (16) قطر (1/2")

The 16 X 1/2" Pex Brass Male Adaptor is a brass fitting that connects 16 mm PEX tubing to a 1/2" male threaded connection. It’s used to join PEX tubing into standard threaded components such as valves, fixtures, or appliances in domestic plumbing or irrigation systems.

It’s made from brass, which provides good strength and corrosion resistance for long-term use in plumbing applications. Brass fittings are typically chosen for durability and reliable performance in contact with potable water.

One end is designed for 16 mm PEX tubing (the PEX side), and the other end is a 1/2" male threaded connection. Installation usually involves sealing the threaded side with Teflon tape and attaching the PEX side using a compatible crimp/clamp method for a secure PEX connection.

Steps: (1) Cut the PEX tubing squarely and deburr the edge. (2) Attach the PEX end with the appropriate crimp or clamp fitting. (3) On the threaded end, wrap Teflon tape around the male threads. (4) Thread the adaptor into the corresponding female fitting by hand, then snug with a wrench. (5) Check for leaks by applying pressure and looking for drips or using a soapy water test.

This adaptor is designed for 16 mm PEX tubing on the PEX side and a 1/2" male threaded connection on the other side. Ensure the mating connector accepts a 1/2" male thread and that your PEX system uses 16 mm tubing.

Brass fittings are commonly used for potable-water installations and offer good durability. For safety and compliance, ensure the fitting meets local codes and use appropriate sealing on threaded joints to prevent leaks.

Use it to connect 16 mm PEX tubing to a 1/2" threaded valve, faucet supply line, appliance inlet, or other 1/2" threaded components in residential water systems or irrigation setups.

Yes. Always cut PEX squarely and deburr, use the correct PEX connection method (crimp/clamp) for the PEX side, apply proper thread sealant or Teflon tape on the threaded side, and avoid over-tightening to prevent thread damage. After installation, perform a pressure test to verify there are no leaks.

Brass fittings are designed for long-term use with good durability. Periodically inspect for signs of wear or corrosion and address any leaks promptly to maintain system integrity.

Brass adaptors typically offer greater durability, heat resistance, and longevity in hot water applications compared to plastic alternatives. They’re often preferred for permanent installations where reliability matters, though they may come at a higher upfront cost.

Yes. You can find other brass PEX adapters on Fepy.com that connect 16 mm PEX to various thread sizes. Example alternatives you might look for include 16 mm PEX to 1/2" female/male adapters and 16 mm PEX to other thread sizes. Product pages follow the site’s standard structure, such as https://fepy.com/product/16x1-2-brass-pex-male-adaptor and related variants. (If you’re comparing options, search within the Brass PEX Adapters category for 16 mm to 1/2" thread items.)

Double-check the end sizes (16 mm PEX side and 1/2" threaded side), ensure compatibility with your PEX system and fittings, confirm the installation method (crimp/clamp for PEX side), and have the necessary tools on hand (PEX crimping tool, wrenches, Teflon tape) to ensure a secure, leak-free connection.