شبكة تدعيم الجبس المصنوعة من الحديد المجلفن قياس (20cm) طول (25M)

The 20cm x 25m GI Plaster Mesh is a galvanized iron reinforcement mesh designed to be embedded in plaster to strengthen surfaces. It’s ideal for wall and ceiling repairs, providing additional support to plaster bonds and helping prevent cracks on large or repaired areas.

Key specs: 20 cm width and 25 m length; galvanized iron construction for rust resistance; high durability and corrosion resistance; flexible and easy to handle; reinforces plaster bonds to reduce cracking; multipurpose for plaster, masonry, and similar wall surfaces.

The mesh acts as a rigid skeleton within the plaster layer. When plaster is applied over it, the mesh distributes stresses evenly across the surface, helping to resist movement, settlement, and cracks that can occur in traditional plaster work.

It’s suitable for interior walls and ceilings, as well as some exterior applications where appropriate protection is used. It’s effective for reinforcing plaster on repairs, patches, and new plaster applications on masonry substrates.

Installation quick guide: - Clean the surface where you’ll apply plaster. - Cut the mesh to fit the area with a slight overlap for joints. - Lay the mesh onto a thin initial plaster coat or embed it into the first plaster layer so it’s flush with the surface. - Overlap edges by at least 10 cm and press firmly to remove air pockets. - Apply additional plaster to cover the mesh completely and finish as usual.

You’ll typically need: plaster mix, a trowel or hawk and trowel, scissors or tin snips to cut the mesh, a utility knife for trimming, a brush to clean dust, and safety gloves/eye protection for handling the mesh.

Yes, it’s designed for construction use. Safety tips: wear gloves to guard against sharp edges, eye protection when cutting, and ensure proper ventilation when mixing plaster. Store the mesh in a dry area to prevent corrosion before use.

Measure the area carefully, then cut the mesh slightly larger than the surface to allow for overlaps. Use tin snips or scissors designed for metal. For every joint, maintain a minimum overlap of about 10 cm to ensure seamless reinforcement.

Comparison highlights: - Alternative: Galvanized Iron Plaster Mesh 20cm x 50m (https://fepy.com/product/galvanized-iron-plaster-mesh-20cm-50m) — longer length for bigger projects and potentially better coverage per roll. - Alternative: Plastic Plaster Mesh 20cm x 25m (https://fepy.com/product/plaster-mesh-20cm-25m-plastic) — lighter and rust-free, but may not offer the same rigidity as galvanized iron in heavy-duty applications. Choose GI mesh for higher durability and crack resistance, especially in masonry or high-stress areas; opt for plastic mesh if you need a lighter option for light-duty plastering.

20 cm width is a common, versatile size that works well for most wall and ceiling plaster applications. If you’re working on larger or more exposed surfaces, wider mesh (where available) or multiple strips overlapping appropriately can provide added reinforcement. Always consider the project size and coverage needs when selecting the width.

The mesh is galvanized for corrosion resistance, making it suitable for interior use and many exterior applications where plaster is properly finished and protected. For exterior use, ensure the plaster system is weather-resistant and follow appropriate exterior plastering practices to maximize longevity.

With proper application and compatible plaster, the reinforcement mesh can extend the life of plaster surfaces by reducing cracking and debonding. Regular inspection for cracks or moisture intrusion is advisable, and re-plastering damaged sections promptly helps maintain performance.