مفتاح ثني القضبان (22mm)

Key specs: 10 inches in length, designed for bars up to 22mm in diameter, heavy‑duty steel construction for durability, compatible with both round and square bars, and intended for professional or DIY use. It’s built to withstand repeated bending tasks.

Yes, it’s designed for bending bars up to 22mm in diameter, and it works with both round and square bars within that range to help you achieve various bend angles and shapes.

This tool is ideal for construction, metalworking, and DIY projects where you need quick field bends on rebar or metal bars. It’s handy for fabricating brackets, frames, supports, or any project requiring precise bends on 22mm bars.

Use a stable, solid workspace. Place the bar fully into the bending notch, align where you want the bend, and strike with a hammer or mallet to form the bend. Keep hands and body clear of the bend area, and use proper eye protection and gloves. Inspect the bar after each bend and avoid over‑bending.

Always wear eye protection and gloves. Ensure the workpiece is properly seated in the notch, keep bystanders away, use an appropriate hammer, and avoid striking the tool at an angle that could cause slips or glancing blows. Work in a well‑lit, stable area.

Yes, it offers a durable, purpose‑built solution for bending 22mm bars with a 10-inch form factor. Its heavy‑duty steel construction and compatibility with both round and square bars make it a versatile choice for professional jobs and DIY projects. For a size comparison, you can review the 10-inch Bar Bending Key here: https://fepy.com/product/10-inch-bar-bending-key

Both are 10-inch tools designed for bending bars, but this model is specifically tuned for 22mm bars, whereas the 10-inch Bar Bending Key may cover a different bar size range. If your project requires exact 22mm bends, this key offers direct suitability with round and square bars up to 22mm.

Yes, Fepy offers alternative sizes such as a 20mm bar bending key (and other bar sizes) to match different project needs. Check out the 20mm option here: https://fepy.com/product/bar-bending-key-20mm

Keep the tool clean and dry after use to prevent rust. Wipe down with a light oil if needed and store in a dry place. Inspect the bending notch for wear and avoid using the tool on materials that exceed its designed capacity.

Its heavy‑duty steel construction, 10‑inch form factor for leverage, and design that supports both round and square bars up to 22mm contribute to long‑lasting performance in demanding environments, making it suitable for frequent use in professional settings.