زاوية الحديد المجلفن قياس (25X25MM) طول (3M) سماكة (0.30mm)

Dimensions: 25 mm x 25 mm legs; length: 3 m; thickness: 0.30 mm. Material: galvanized steel; finish: galvanised coating for corrosion resistance.

Use standard metalworking tools such as tin snips or a fine-toothed saw for cutting, and a metal file or deburring tool for edges. For fastening, use galvanized screws or bolts appropriate to the load and mounting surface; drill pilot holes as needed for accurate alignment.

1) Measure and cut to length if needed. 2) Deburr and clean edges. 3) Mark hole positions if you’ll bolt it. 4) Drill pilot holes through the leg (and countersink if using bolts). 5) Secure with galvanized hardware, ensuring the angle sits square to the surface.

Yes, its galvanised steel construction provides corrosion resistance suitable for many outdoor or damp environments. For very harsh conditions, consider additional protective coatings or alternative materials.

Common uses include light-duty framing and bracing for shelves and displays, support brackets for DIY projects, light structural framing, and junctions in metal or wood constructions.

0.30 mm is a mid-range thickness for light to moderate tasks. If you need lighter loads, a 0.25 mm option may be more economical; for heavier loads, a 0.40 mm option offers greater strength. See these alternatives on Fepy for direct comparison: https://fepy.com/product/galvanized-angle-25x25x3m-0.25mm and https://fepy.com/product/galvanized-angle-25x25x3m-0.40mm. You can also compare with a different profile at https://fepy.com/product/galvanized-angle-20x20x3m-0.30mm.

If you’re exploring sizes or thicknesses, consider these options on Fepy: - 25x25x3m 0.25mm: https://fepy.com/product/galvanized-angle-25x25x3m-0.25mm - 25x25x3m 0.40mm: https://fepy.com/product/galvanized-angle-25x25x3m-0.40mm - 20x20x3m 0.30mm: https://fepy.com/product/galvanized-angle-20x20x3m-0.30mm

Wear cut-resistant gloves and eye protection when cutting or drilling edges, handle the metal with care to avoid sharp edges, and store pieces dry to prevent corrosion at cut surfaces.

It offers a practical balance of 25x25 mm leg size, 3 m length, and 0.30 mm thickness for light to moderate framing tasks, with a galvanised finish that extends longevity in common environments. This combination often provides good value for standard DIY framing and bracing work.