Question 1

What is the GI Wall Angle 25mm x 3m x 0.30mm used for?

Accepted Answer

This galvanized steel angle is used for lightweight framing, wall bracing, and structural support in both residential and commercial building projects. It can reinforce corners, create frames for partitions, or serve as a mounting/brace element in various constructions.

Question 2

What are the key specifications of this GI Wall Angle?

Accepted Answer

Dimensions: 25 mm width, 3 m length, and 0.30 mm thickness. Material: galvanized steel for corrosion resistance. It can be cut to size, bent to fit spaces, and is paintable for customization.

Question 3

What does GI stand for in GI Wall Angle?

Accepted Answer

GI stands for Galvanized Iron/Steel, which means the steel is coated with zinc to improve corrosion resistance and durability.

Question 4

How should I install this wall angle?

Accepted Answer

Plan your layout, cut to the needed length, mark and drill pilot holes, and fasten with appropriate screws or bolts into the framing. If used outdoors, ensure proper sealant or painting to maintain the finish. Wear protective gear when cutting or handling sharp edges.

Question 5

Can I bend or cut this wall angle to fit corners and irregular spaces?

Accepted Answer

Yes. It’s designed to be easily cut to size and bent as needed to fit around corners or irregular dimensions.

Question 6

Where can I use this GI Wall Angle?

Accepted Answer

Ideal for wall framing, brackets, bracing, door/window frames, and general structural supports in both indoor and outdoor settings where corrosion resistance is beneficial.

Question 7

How does this 25x3m 0.30mm GI Wall Angle compare to a similar 25x25mm option available on Fepy?

Accepted Answer

The 25x3m length offers a longer continuous run, which reduces joints in longer installations, while the 25x25mm variant provides a slightly wider profile for added strength in some applications. See the alternative on Fepy at: https://fepy.com/product/galvanized-gi-wall-angle-25mm-x-25mm-x-2m-0-30mm

Question 8

How does this 25mm width compare to a 20mm GI wall angle option available on Fepy?

Accepted Answer

The 25mm width provides a broader edge and greater load distribution than a 20mm option, which can be suitable for lighter framing. Compare with: https://fepy.com/product/galvanized-gi-wall-angle-20mm-x-3m-0-30mm

Question 9

What safety considerations should I keep in mind when using this wall angle?

Accepted Answer

Wear gloves to protect against sharp edges, use eye protection during cutting, and ensure proper handling to avoid injury. If installed outdoors, ensure corrosion protection maintenance to prolong longevity.

Question 10

What maintenance or re-painting steps are recommended for this GI Wall Angle?

Accepted Answer

Regular cleaning to remove dirt and moisture, followed by priming and painting or applying a protective coating as needed to maintain appearance and corrosion resistance. Touch up any scratched areas to prevent rust.

Question 11

What makes this product a good value choice for builders and homeowners?

Accepted Answer

It combines corrosion-resistant galvanized steel with easy fabrication (cutting, bending, painting) and a durable profile, offering long-lasting performance for framing and bracing at a reasonable cost. Its 3 m length minimizes joints in longer runs, providing efficiency on larger projects.

زاوية الجدران المصنوعة من الحديد المجلفن قياس (25X25mm) سماكة (30MM) طول (3M)

Features & Benefits

Specification

Attachments

Frequently Asked Questions