Question 1

What is 30 X 60 X 25 X 2.5MM SS316 Marble Angle?

Accepted Answer

The 30 X 60 X 25 X 2.5MM SS316 Marble Angle is a stainless steel angle bracket made from grade SS316 stainless steel. It features an L-shaped profile with a 30 mm and 60 mm leg, a 25 mm dimension associated with the profile, and a 2.5 mm material thickness. It combines strong mechanical performance with excellent corrosion resistance, making it suitable for structural framing, supports, brackets, and marine or chemical environments.

Question 2

What do the four numbers 30 X 60 X 25 X 2.5mm mean in this product name?

Accepted Answer

They indicate the profile size: two leg lengths (30 mm and 60 mm), a dimension related to the profile width (25 mm), and the material thickness (2.5 mm). This helps you identify the exact size and fit for your project.

Question 3

Why choose SS316 stainless steel for this marble angle?

Accepted Answer

SS316 contains chromium, nickel, and molybdenum, giving it superior corrosion resistance, especially in chloride-containing and marine environments. It’s more resistant to rust and staining than common grades like SS304, which makes it a better choice for outdoor, coastal, or chemical applications.

Question 4

What are the general mechanical properties I can expect from this SS316 marble angle?

Accepted Answer

SS316 marble angle offers good strength, toughness, and weldability with excellent corrosion resistance. It’s suitable for structural framing, brackets, and supports where exposure to moisture or corrosive elements might occur. For precise mechanical values, refer to the material standards for SS316.

Question 5

How do I install this angle in a project?

Accepted Answer

Typical steps: measure and mark, cut the angle to length using a suitable stainless steel saw, deburr edges, and then fasten with stainless steel bolts or weld as required. When bolting, use corrosion-resistant fasteners to avoid galvanic corrosion, and ensure proper alignment before securing.

Question 6

In what environments is this SS316 marble angle best suited?

Accepted Answer

It’s well-suited for outdoor installations, maritime or coastal settings, chemical environments, and any project where high corrosion resistance is important. It also works well for indoor structural framing and brackets where durability is a priority.

Question 7

What surface finish does this angle typically have and can it be finished further?

Accepted Answer

The part ships with a standard stainless steel surface finish. Stainless steel angles can often be polished, brushed, or passivated post-purchase if a different look or enhanced corrosion protection is desired, depending on your project requirements.

Question 8

How should I maintain and clean SS316 marble angle to extend its life?

Accepted Answer

Clean with mild soap and water and dry thoroughly to prevent water spots. Avoid abrasive cleaners that could scratch the surface. For outdoor or marine use, occasional light passivation or applying a suitable rust-preventive treatment can help, depending on the environment.

Question 9

How does this SS316 option compare to SS304 or SS316L alternatives available on Fepy?

Accepted Answer

SS316 offers superior corrosion resistance in chloride-rich environments (like salt water) compared with SS304. SS316L has similar corrosion resistance but lower carbon content, which can improve weldability and reduce carbide precipitation in welded structures. For harsh outdoor or marine applications, SS316 variants are typically preferred over SS304. If you’re choosing between these, consider exposure conditions, budget, and fabrication method.

Question 10

Are there other sizes of SS316 Marble Angle available on Fepy for different projects?

Accepted Answer

Yes, Fepy typically offers multiple sizes of SS316 Marble Angle to fit various project needs. Check the catalog for available profiles and dimensions to choose the best match for your application.

Question 11

What kinds of applications is this angle ideal for?

Accepted Answer

It’s ideal for structural framing, brackets, supports, railings, and hardware where a strong, corrosion-resistant angle is needed. Marine and outdoor installations, as well as chemically exposed environments, are common use cases.

Question 12

What safety precautions should I follow when handling or cutting this angle?

Accepted Answer

Wear cut-resistant gloves and eye protection when handling or machining. Use appropriate tools designed for stainless steel, deburr edges after cutting, and ensure proper ventilation if welding or grinding. Handle with care to avoid sharp edges and potential injuries.

زاوية تثبيت الرخام المصنوعة من الستانلس ستيل (SS316) قياس (30x60x25x2.5mm)

وصف المنتج