قنوات الحديد المجلفن قياس (35X0.45MM) طول (3M)

The 35mm x 3m x 0.45mm GI Furring Channel is a galvanized iron framing member designed to create a stable grid for ceilings and walls. It provides a secure attachment point for ceiling tiles, drywall, and lightweight partitions, helping to ensure level installations and durable support across large areas.

Key specs: 35mm width for secure tile/drywall attachment, 3m length for broad coverage, 0.45mm thickness for a balance of strength and lightness, galvanized iron for corrosion resistance, easy installation, and precise design for accurate alignment.

For installation: measure and cut to required length, mark alignment lines, fix the channels to structural supports with appropriate screws or hangers, ensure the channels are plumb and level, then attach ceiling grids or drywall to the channels. Use compatible fasteners for your substrate and follow local building practices for safe mounting.

Common use cases include creating a ceiling grid for gypsum board or tile installations, forming a lightweight wall partition framework, and supporting various lightweight construction projects where a stable, corrosion-resistant channel is needed.

Safety notes: wear cut-resistant gloves when handling metal channels, use proper eye protection when cutting, store channels flat to prevent warping, and follow local building codes for ceiling and wall installations. The galvanized finish offers corrosion resistance, but ensure the channel is used within its load and span limits for the intended application.

The 0.50mm variant is slightly thicker and may offer higher strength and rigidity in demanding settings, at a marginal weight increase and potential price difference. If your project requires extra stiffness or longer spans, the 0.50mm option could be preferable. Compare here: https://fepy.com/product/gi-furring-channel-35mm-3m-0-5mm

A 50mm wide channel provides greater surface area for attachment and can offer enhanced rigidity over the same length. It may be preferable for heavier ceiling grids or wider spans. See a 50mm variant here: https://fepy.com/product/gi-furring-channel-50mm-3m-0-45mm

A 25mm wide channel is narrower and best suited for lighter loads or tight spaces where more precise alignment is required. The 35mm width offers a balance of strength and ease of installation for typical drywall and tile ceilings. Explore a 25mm option here: https://fepy.com/product/gi-furring-channel-25mm-3m-0-40mm

Yes. The 3m length reduces the number of joints, the galvanised finish ensures durability in dry and some humid environments, and the 0.45mm thickness provides reliable strength without excessive weight. For large installations, this can lower labor time and material handling costs while delivering steady performance.

Common complements include metal snips or a saw for cutting, appropriate fasteners (screws/anchors suited to your substrate), a level or laser for alignment, a tape measure, and potentially ceiling grid components or drywall screws compatible with the channel.

Yes. If a single piece longer than 3 meters is needed, you can butt join two channels and use compatible joining accessories or connectors to maintain continuity and alignment. Ensure the join is secure and remains level for the finished surface.

Keep the channel clean and dry, promptly address any exposed ends after cutting to prevent rust spread, store away from moisture, and inspect for any signs of corrosion or deformation over time. The galvanised coating provides corrosion resistance in typical dry-to-wet environments, but avoid prolonged exposure to highly aggressive chemicals or standing water.