خرطوشة فلتر الغاز العضوي و الحمضي (3M) موديل (6003) باللون الرمادي

It is compatible with 3M Half and Full FacePiece respirators in the 6000, 7000 and FF-400 Series that use bayonet filter holders.

Turn off the respirator, remove the used cartridge, align the cartridge with the bayonet holder, push in and twist clockwise until it locks, then confirm a secure seal and proper locking before use.

6003 protects against both organic vapors and acid gases, while 6001 is for organic vapors only and 6002 targets acid gases only. Choose based on the contaminants present in your environment.

Use it in industrial settings where organic vapors and acid gases may be present, such as painting, degreasing, chemical manufacturing, solvent handling, and certain printing or finishing processes.

Key features include organic vapor and acid gas filtration, compatibility with 3M bayonet filter holders on 6000/7000/FF-400 series, and the swept-back design for better visibility and balance.

Replacement depends on exposure level, concentration of contaminants, and breathing rate. Replace the cartridge when you notice breakthrough (odor/sensation), after a stated service life in your workplace guidelines, or per your employer’s safety protocol.

Store in a cool, dry place away from direct sunlight and heat sources, in the original packaging until ready to use. Avoid crushing the cartridge and handle with clean hands to prevent contamination.

Two compatible alternatives on Fepy.com are also from 3M and fit similar bayonet holders: 3M 6001 Organic Vapor Cartridge and 3M 6002 Acid Gas Cartridge. Their product pages are: - https://fepy.com/product/3m-6001-organic-vapor-cartridge - https://fepy.com/product/3m-6002-acid-gas-cartridge

Yes. Use only with compatible 3M respirators and bayonet holders, ensure a proper fit and seal, avoid use in oxygen-deficient atmospheres, and follow all applicable safety standards and training requirements. The cartridge is designed to meet relevant safety approvals for organic vapors and acid gases when used as part of the proper respirator system.

The 6003 cartridge is designed for 3M bayonet filter holders and 3M respirators. Compatibility with non-3M holders is not guaranteed and may affect performance.