كوع السباكة البلاستيكي (UPVC) قياس (4") بزاوية (45Deg) درجة

Material: UPVC. Size: 4 inches. Angle: 45 degrees. Applications include water supply, drainage, and irrigation. It’s built for corrosion, chemical, and impact resistance, and it is designed to fit standard 4" UPVC pipes with easy, low-maintenance installation.

The 45-degree bend redirects fluid with a gentler turn than a sharp elbow, reducing turbulence and minor pressure loss while achieving the desired direction change. This helps maintain smoother flow in piping runs.

This elbow is suitable for residential, commercial, and industrial piping systems. Use it in water supply lines, drainage networks, and irrigation installations to navigate around obstacles or corners while using standard UPVC piping.

Typical installation steps: 1) cut the pipe square and deburr edges, 2) dry-fit to confirm alignment, 3) apply UPVC primer to the pipe ends and the elbow socket, 4) apply solvent cement to the primed areas, 5) insert the pipe into the elbow and hold until the bond sets, 6) check alignment and look for leaks once the joint cures. Always follow local codes and wear protective gear when using cement.

UPVC is widely used in plumbing and is suitable for many potable water applications when installed per local codes and using properly rated fittings. Check applicable standards and approvals in your region to ensure compatibility with your specific system.

If you’re weighing options, consider these nearby alternatives on Fepy: 1) 4" x 90° UPVC Elbow — https://fepy.com/product/4-x-90-degree-upvc-elbow 2) 3" x 45° UPVC Elbow — https://fepy.com/product/3-x-45-degree-upvc-elbow 3) 4" x 45° PVC/UPVC Elbow — https://fepy.com/product/4-x-45-degree-pvc-elbow These provide different angles or sizes to suit your specific layout while staying within UPVC piping systems.

Yes. Its UPVC construction and 4" diameter make it suitable for irrigation piping and drainage runs, in addition to typical water supply lines, provided the system components are rated for UPVC and the installation follows proper plumbing practices.

Ensure the pipe size is a 4" nominal diameter and check that the pipe ends are clean and square. Use compatible UPVC primer and solvent cement, align the pipe and elbow properly before bonding, and verify that the joint is fully seated and cured per product guidelines.

UPVC fittings generally require minimal maintenance—inspect joints for leaks occasionally and ensure the cement bond remains intact. With proper installation and typical use in appropriate environments, such elbows offer long-term durability and resistance to corrosion and chemicals.

UPVC elbows offer excellent corrosion resistance, chemical resistance, and ease of installation at a competitive price. They’re lightweight and compatible with standard UPVC piping, making them a practical choice for reliable, long-term piping systems.

Yes. Key tips: use the correct primer and cement on all primed surfaces, apply an even and sufficient amount of cement, avoid twisting the fittings after bonding, hold the joint until the cement sets, and verify the joint for leaks after the system is pressurized.