مصباح اقتصادي موفر للطاقة استطاعة (40W)

No. This CFL bulb is non-dimmable and should be used with non-dimmable fixtures.

It is rated to last up to 10,000 hours, reducing maintenance and replacement costs over time.

Yes, it is suitable for enclosed fixtures, helping to protect the bulb from dust and dirt while maintaining performance.

It's well-suited for general lighting in homes, offices, shops, and other indoor spaces where energy savings and reliable brightness are important.

1) Switch off power to the fixture. 2) Allow the bulb and fixture to cool if recently used. 3) Remove the old bulb and insert the 40W CFL firmly into the socket. 4) Restore power and test the light. If the fixture is enclosed, ensure it remains properly sealed.

Yes, the bulb is described as environmentally friendly and compliant with ENERGY STAR regulations, contributing to energy savings and reduced environmental impact.

The CFL provides roughly the same brightness (450 lm) as a 150W incandescent but uses only about 40W, delivering substantial energy savings and cooler operation.

A 60W equivalent LED bulb typically uses 8–12W and often offers longer lifespans and instant full brightness. The CFL (<40W) provides similar brightness with higher energy use than LED, but CFLs can be a cost-effective alternative on some inventories. See a 60W-equivalent LED bulb on Fepy for a direct comparison: https://fepy.com/product/60w-equivalent-led-bulb

Yes. For a CFL alternative with a similar brightness, you can compare to a 42W CFL bulb on Fepy: https://fepy.com/product/42w-equivalent-cfl-bulb. For LED options, you can explore a 15W LED bulb here: https://fepy.com/product/15w-led-bulb

CFL bulbs contain a small amount of mercury and should be handled carefully to avoid breakage. Dispose of or recycle them according to local regulations and avoid breaking the bulb; if it breaks, follow proper clean-up guidelines to minimize exposure.