مرساة إسفينية من الحديد المجلفن مقاس (6x40mm) باللون الفضي مكون من (100Pcs) قطعة

They are made from galvanized steel (GI) with a silver finish, offering corrosion resistance for indoor and outdoor applications.

Each anchor is 6 mm in diameter and 40 mm long (6x40mm). The pack contains 100 pieces.

They are designed for use in solid concrete and are also suitable for use in brick or block bases when used appropriately with the right drill size and embedment depth.

Yes, the galvanized finish provides corrosion resistance, so they can be used in both indoor and outdoor environments where concrete or masonry is present.

1) Drill a hole in the concrete with a hammer drill to the recommended depth and a 6 mm diameter. 2) Clean the hole to remove dust and debris. 3) Insert the wedge anchor into the hole until the base sits flush. 4) Thread the fixture bolt into the anchor and tighten gradually to cause the wedge to expand and grip. 5) Stop once the desired clamping load is reached; avoid over-tightening. 6) Inspect for secure mounting before use.

Wear eye protection and gloves when drilling. Ensure the work area is clear of bystanders, and power tools are used per manufacturer guidelines. Check that the drilled hole is clean and the anchor is properly seated before tightening.

base material strength, hole depth, and the load you plan to support determine size. For standard concrete mounting with moderate loads, a 6x40mm wedge anchor is common. For heavier loads or deeper embedment, use longer or larger-diameter anchors, or switch to a different anchor type as appropriate.

For similar concrete fastening needs, you can consider these alternatives available on Fepy: - 6x50mm GI Wedge Anchor (Silver) — https://fepy.com/product/6x50mm-gi-wedge-anchor-silver-100pcs - 8x40mm GI Wedge Anchor (Silver) — https://fepy.com/product/8x40mm-gi-wedge-anchor-silver-100pcs - 6x40mm SS Wedge Anchor (Stainless) — https://fepy.com/product/6x40mm-ss-wedge-anchor-silver-100pcs These offer different embedment depths or materials to suit specific load and environment requirements while staying within the same general wedge-anchor fastening category.

Common applications include mounting heavy shelves or racks to concrete floors, securing equipment or machinery to concrete bases, fastening handrails, securing pipe supports, and attaching brackets or anchors for structural fixes in masonry.

Yes. Use the correct drill size (6 mm for this size), drill into solid concrete, clean the hole thoroughly before insertion, ensure the anchor seats fully, and tighten to the recommended clamping load without over-tightening. Avoid drilling into damaged or excessively old concrete, and replace anchors if they show signs of wear or deformation.

Bulk packaging options may be available for larger projects. Check Fepy for higher quantity offerings or bulk pricing on wedge anchors, or contact the seller for current discounts on larger lots.