برغي برأس ذاتي الثقب قياس باللون الأبيض يباع (Per Pkt)

This is a white-finish, self-drilling wafer head screw sized 7/16 inch long and approximately 6 mm in diameter. Its self-drilling tip allows you to fasten without pre-drilling, and the wafer (low-profile) head provides a flush, clean finish for a variety of projects.

A wafer head is a shallow, flat head with a low profile. It sits closer to the surface and creates a smooth, unobtrusive appearance, making it ideal for cosmetic finishes or applications where a bulky head would be undesirable.

No. The screw features a self-drilling tip designed to create its own pilot hole as you drive it in, speeding up installation (using a drill/driver with the appropriate bit).

The description notes suitability for woodworking and metalworking. Actual use depends on the material thickness and composition, but it’s intended for fastenings where a low-profile, flush finish is desired.

Key specs: length 7/16 inch, diameter about 6 mm, self-drilling tip, wafer head, white finish, per packet (Pkt).

Use a drill/driver with an appropriate bit (commonly Phillips). Set to a moderate speed and drive until the wafer head sits flush with the surface. No pre-drilling is required for many materials.

It’s suitable for cabinetry, panel assemblies, furniture frames, and general fastenings where a clean, low-profile finish is desired and pre-drilling isn’t practical.

Wear eye protection, keep hands clear of the drilling area, and ensure materials are properly supported. Use the correct bit and avoid over-tightening to prevent stripping or damage.

For alternatives with similar self-drilling and wafer-head characteristics, you can explore other options on Fepy to compare sizes, finishes, and prices. Quick-start options include: https://fepy.com/search?q=self-drilling+wafer+head+screw, https://fepy.com/search?q=white+self-drilling+screw, and https://fepy.com/search?q=wafer+head+screw.

If you’re not satisfied, you can use Fepy’s standard return process. Returns are handled per Fepy’s generally applicable return guidelines.

Consider the material type, thickness, and the required surface finish. A wafer head offers a flush look, while the size (length and diameter) should suit the material’s thickness and load. If you need a different finish or length, browse Fepy’s options to compare.

You can explore more options via these search links: https://fepy.com/search?q=self-drilling+wafer+head+screw, https://fepy.com/search?q=white+self-drilling+screw, and https://fepy.com/search?q=wafer+head+screw.