قنوات الحديد المجلفن قياس (73X30) طول (3000mm)

Key specs: cross-section 73 x 30 mm, length 3000 mm, galvanized iron construction for corrosion resistance, lightweight for easy handling, strong and stable for heavy loads, designed for precise alignment and easy installation, and suitable for walls, ceilings, and partitions.

Galvanized iron is coated with zinc, which protects the steel from rust and corrosion. This makes the stud more durable in damp or industrial environments and extends its service life compared with non-galvanized variants.

It's ideal for industrial wall framing, partition walls, ceiling framing, and other structural framing tasks where a strong, durable, and easy-to-handle metal stud is beneficial.

Plan your layout, mark plumb lines, cut to length as needed, align studs accurately, and secure them using appropriate fasteners or connectors. Ensure straight, level placement and leave room for electrical and plumbing as required by your project.

You’ll typically need metal snips or a saw for cutting, measuring tape, a level, chalk line, screws or fasteners suitable for metal framing, a drill or screwdriver, and gloves to protect your hands from sharp edges.

Handle edges with care to avoid cuts, wear gloves and eye protection, verify cuts are clean, and ensure proper storage to prevent warping. Use appropriate PPE when cutting or drilling and follow site safety guidelines for metal framing work.

For similar framing options, you can compare with other GI studs such as the 60x30x3000mm or 73x40x3000mm models on Fepy.com. These alternatives offer different cross-sections to suit various load requirements and space constraints. Example alternatives: https://fepy.com/product/gi-stud-60x30x3000mm and https://fepy.com/product/gi-stud-73x40x3000mm.

Choose this GI Stud when you need higher moisture resistance, greater durability, faster on-site installation, and consistent dimensional accuracy. It’s also beneficial in industrial or commercial environments where a robust metal framing system is preferred over wood.

The product is designed for a precise fit to simplify alignment. To ensure accuracy, use a chalk line or laser level for straight lines, verify each stud’s position before fixing, and make small, clean cuts to maintain uniform gaps and finishes.

Load capacity depends on factors like span, fastener type, connection details, and the surrounding framing. For critical structural applications, consult with a structural engineer or refer to project-specific design guidelines to ensure compliance with relevant codes.

Yes. If you’re planning a complete framing system, you might also consider similar GI studs with different cross-sections to fit your design. For example, you can explore: 60x30x3000mm at https://fepy.com/product/gi-stud-60x30x3000mm and 73x40x3000mm at https://fepy.com/product/gi-stud-73x40x3000mm, to identify the best match for your project.