Question 1

What is the 75 mm Hole Saw Cutter designed to do?

Accepted Answer

This cutter is designed to create clean circular holes up to 75 mm in diameter in materials like concrete, masonry, stone, and tile, with an adjustable depth gauge for precise depth control.

Question 2

What materials can I cut with this hole saw cutter?

Accepted Answer

It’s suitable for concrete, masonry, stone, tile, wood, metal, and plastic, provided you use the appropriate blade and feed rate. The depth gauge helps you control how deep each cut goes.

Question 3

How do I use the depth gauge and set the cutting depth?

Accepted Answer

Attach the cutter to your drill, loosen the depth gauge, slide it to the desired depth, then tighten to lock in place. Start with a conservative depth and gradually increase as needed while cutting.

Question 4

What makes this hole saw cutter easy to use?

Accepted Answer

It features a quick-change blade system for fast blade swaps, an adjustable depth gauge for precise cutting depth, a dust collector to keep your workspace cleaner, and anti-slip handling for safer operation.

Question 5

What safety precautions should I follow when using it?

Accepted Answer

Wear eye protection, hearing protection, and gloves. Secure the workpiece, keep hands away from the cutting edge, use the dust collector if available, and avoid overheating by letting the tool cool if cutting dense material.

Question 6

Can it cut through metal or wood as well as masonry and tile?

Accepted Answer

Yes, the tool is designed for multiple materials, including metal and wood, when using the appropriate blade and cutting technique. For best results, match the blade to the material and follow recommended speeds.

Question 7

What’s included in the package with this 75 mm hole saw cutter?

Accepted Answer

The package includes the 75 mm hole saw blade, an adjustable depth gauge, and a quick-change blade system for easy blade replacement.

Question 8

How does this compare to the 68 mm and 90 mm hole saw cutters on Fepy?

Accepted Answer

The 68 mm cutter offers a smaller diameter for tighter holes, while the 90 mm cutter provides a larger diameter for bigger openings. The 75 mm version sits between them in cutting capacity and is ideal for standard electrical and plumbing openings. See the alternatives here: 68 mm: https://fepy.com/product/68mm-hole-saw-cutter and 90 mm: https://fepy.com/product/90mm-hole-saw-cutter

Question 9

What are typical use cases for this 75 mm cutter?

Accepted Answer

Common uses include installing electrical boxes, running plumbing or conduit through masonry or tile, drilling ventilation or drainage holes in walls and floors, and creating clean openings in concrete or stone surfaces.

Question 10

How do I maintain or replace the blade when it becomes dull?

Accepted Answer

Use the quick-change blade system to remove the dull blade and replace it with a sharp replacement. Clean debris from the arbor before installing a new blade, and store the cutter in a dry place to prevent corrosion.

Question 11

What is the return policy if I’m not satisfied with the cutter?

Accepted Answer

If you’re not satisfied, you can initiate a return as per Fepy’s return policy. Ensure the product is in acceptable condition and obtain any required return authorization to process the refund or exchange.

شفرة قص و تفريغ الثقوب الدائرية قياس (70mm)

Features & Benefits

Specification

Attachments

Frequently Asked Questions