ضاغط الهواء قياس (9Bar) من (ABAC) استطاعة (3HP) حصان باللون الأزرق موديل (A39B/270CM3)

Core specs include a 3 HP motor, 9 Bar output pressure, and 270 cm3 air displacement. It features a durable blue enclosure, built-in wheel kit and double handles for mobility, anti-vibration feet for reduced noise, an integrated cooling system, a pressure-switch control system to maintain constant pressure, and a temperature control valve to limit temperature fluctuations.

It incorporates anti-vibration feet and an integrated cooling system to minimize noise and heat buildup, helping the unit run more quietly and efficiently during extended use.

This compressor is well-suited for painting and spray applications, construction tasks, and workshop use where a steady air supply and higher pressure are needed for pneumatic tools and spray equipment.

Place the unit on a stable, level surface and ensure access to a suitable power supply. Use the built-in wheel kit and double handles to position it as needed. Connect hoses and accessories, turn on the unit, and rely on the pressure-switch to maintain the desired pressure while using the attached condensate drain to release moisture buildup as required.

The compressor uses a pressure-switch control system to keep pressure at the target level (up to 9 Bar). The temperature control valve helps reduce temperature fluctuations. Avoid running tools at excessive draw for long periods and allow short breaks to prevent overheating.

Regularly drain condensate from the tank using the drain valve to minimize moisture buildup. Inspect hoses and fittings for leaks, keep the cooling system clean, and check the anti-vibration feet and wheels for wear. Periodic visual inspections and following the manufacturer’s maintenance recommendations will help extend the unit’s life.

Key safety features include a pressure-switch control to prevent over-pressurization and a temperature control valve to manage heat. The unit’s robust enclosure and vibration-damping feet also contribute to safer, more stable operation in a workshop setting.

It comes with a built-in wheel kit and double handles for mobility, anti-vibration feet to reduce noise and vibration, and an integrated cooling system along with a pressure-switch control and temperature control valve for safer operation.

Compared to the ABAC A38B/240CM3 8 Bar 2.5 HP model, this A39B/270CM3 offers higher pressure (9 Bar) and greater displacement for tougher tasks, with similar mobility features. It can be contrasted with the ABAC A41C/300CM3 9 Bar 4 HP model for higher power output and larger displacement, which may be overkill for lighter tasks. For reference: ABAC A38B comparison: https://fepy.com/product/abac-air-compressor-a38b-240cm3-8bar-2-5hp-blue; ABAC A41C comparison: https://fepy.com/product/abac-air-compressor-a41c-300cm3-9bar-4hp-blue.

Consider your air demand: if you need higher pressure up to 9 Bar and a solid displacement for spraying or heavy-duty pneumatic tools, this model is a strong fit. Compare it with other ABAC options in terms of displacement (cm3), maximum pressure (Bar), motor power (HP), and overall footprint to ensure it matches your space and power availability.

Yes. Regularly drain condensate to prevent moisture buildup, keep ventilation clear for the cooling system, inspect hoses for wear, and use appropriate pressure and duty-cycle settings for your tools. Store the unit on a stable surface and perform periodic checks on wheels, handles, and mounting hardware to maintain stability and performance.