مقبس كهربائي أحادي من (ABB) ثنائي المآخذ (13Amp) موديل (Inora BL227WH) لون أبيض

Key details include two switched socket outlets, a 13A rating, single-pole switching, a white finish and ABB Inora model reference BL227WH. The listed dimensions are approximately 30.8 x 146 x 86 mm, the EAN is 6941593436934, and the stated country of origin is Switzerland. Final compatibility should be checked against the project drawings and approved material schedule.

Switch off or isolate the circuit before maintenance. Clean the faceplate with a soft, dry or lightly damp cloth and avoid abrasive cleaners, solvents or excessive moisture. Periodically check for discoloration, heat damage, cracking, loose mounting, buzzing or unreliable switching; isolate the circuit and arrange professional inspection if any defect is found.

It may be used as a replacement when the existing back box, fixing arrangement, circuit conductors and protective devices are compatible. The supply must be isolated before removal, and the wiring condition, polarity and earthing should be inspected. Replacement and testing should be performed by a qualified electrician rather than relying only on visual similarity.

The electrician should verify conductor identification, terminal tightness, earth continuity, insulation resistance, polarity and operation of both single-pole switches. Circuit protective devices and RCD or RCBO operation should also be checked where applicable. Results should be recorded according to the project's inspection and testing requirements.

Yes, the protective earth terminal must be connected to an effective earthing system. RCD or RCBO protection should be provided wherever required by current UAE regulations, local utility rules and the project design, particularly for circuits serving wet areas or locations with increased electrical risk. The protective device rating must coordinate with the cable and circuit load.

Use in kitchens or other areas near water must follow the required separation distances, circuit protection and local electrical regulations. It should not be installed in bathroom zones or exposed outdoor locations unless its verified ingress-protection rating and the selected enclosure are approved for that environment. For damp, dusty or external locations, choose a suitably rated weatherproof socket system.

Yes, provided a suitable two-gang flush or surface box is selected for the wall construction. For blockwork or concrete, coordinate box positioning and conduit routes during first-fix installation. For drywall, use an approved cavity box or securely supported back box. The finished box should sit level and at the correct depth so the faceplate mounts without distortion.

Use a two-gang wall box compatible with the socket's mounting arrangement and the available wiring space. The listed product dimensions are approximately 30.8 x 146 x 86 mm, but installers should confirm the faceplate size, fixing centres, terminal clearance and required box depth before first-fix work. A deeper box may be needed where larger conductors or multiple cable entries are used.

Installation should be completed by a licensed electrician. The circuit must first be isolated and proven dead, after which the live, neutral and earth conductors are terminated at the correctly marked terminals. The socket is then secured to a compatible wall box, aligned without overtightening and tested for polarity, earth continuity, insulation resistance and functional operation before energising.

Yes, its 13A two-gang format is relevant to many UAE residential and commercial fit-outs using Type G plug systems. Project engineers should verify compliance with the current UAE electrical requirements, local authority rules such as DEWA or the relevant emirate utility regulations, and the approved project specification before installation.

It is suitable for indoor socket outlets in homes, apartments, villas, offices, shops and other commercial interiors. Typical applications include televisions, computers, chargers and general portable appliances. Suitability for refrigerators, washing machines, air-conditioning equipment or other high-load appliances must be confirmed against the appliance rating and circuit design.

The unit provides two 13A socket outlets, but the safe combined load depends on the final circuit design, cable size, protective device, installation method and applicable electrical regulations. Do not assume that two high-load appliances can operate simultaneously without checking circuit capacity. A qualified electrician should verify the connected load and protection requirements.

It's a white 2-gang wall socket with two 13A outlets, each controlled by a single-pole switch. The BL227WH in the Inora range from ABB provides two switched outlets for powering and controlling two devices from one faceplate.

Single pole means each socket switch disconnects the live conductor when switched off, while the neutral conductor remains connected. Correct live, neutral and earth connections are therefore essential. Isolation at the distribution board is still required before installation, testing or maintenance.