ABB Inora 2 Gang 13A Double Pole Switched Socket Outlet with Dual USB Type-A Ports Classic Grey BL262-G

The BL262-G combines two switched 13A socket outlets with built-in USB charging ports in one faceplate. Each mains outlet has its own switch, allowing connected equipment to be isolated without removing the plug. Buyers should refer to the ABB product datasheet and packaging for the USB port type, output voltage, combined charging current, terminal capacity and applicable certification before specifying it for a project.

Yes, a 13A switched socket format is widely relevant to UAE residential and commercial projects that use British-style plugs and socket outlets. Installation must follow the latest requirements of the relevant UAE authority, such as DEWA, ADDC, SEWA or the applicable local utility, together with project specifications and relevant BS or IEC requirements. Final approval should be confirmed by the project's electrical consultant or authority.

It is suitable for indoor locations such as villas, apartments, hotel rooms, offices, meeting rooms, reception areas, retail units and other commercial interiors. The integrated USB facility is particularly useful near beds, desks, worktops and charging stations. It should not be installed outdoors, in bathrooms or in damp and dusty areas unless it is fitted within a correctly rated enclosure and the complete installation is approved for that environment.

Installation should be completed by a licensed electrician. The supply must be isolated and verified as dead before work begins. The electrician should confirm the back-box dimensions and depth, terminate the live, neutral and earth conductors at the identified terminals, tighten connections to ABB's specified torque, secure the socket without trapping cables and test polarity, earthing and circuit protection before energising it. The manufacturer's wiring instructions must always take priority.

A compatible double-gang concealed or surface back box with adequate depth is required. USB sockets contain internal electronic components and can need more wiring space than a standard double socket, so box depth and cable-bending clearance are important. Confirm the faceplate dimensions, fixing-centre spacing and minimum box depth from the current ABB BL262-G technical drawing before preparing blockwork, drywall or joinery openings.

Yes. The double switched design provides an individual switch for each 13A outlet, allowing users to turn one connected appliance off while leaving the other powered. The switches isolate the socket outlets, while operation of the integrated USB section should be confirmed from the manufacturer's wiring diagram because USB power-control arrangements may vary by model.

They can generally be used simultaneously when the circuit and connected loads remain within the socket, circuit and USB module ratings. The two outlets must not be treated as providing an unlimited combined load, and high-power appliances should only be connected to a suitably designed final circuit. USB charging speed may also be shared between ports, so check ABB's stated combined USB output for the BL262-G.

The USB ports are intended for compatible low-voltage devices such as smartphones, tablets, power banks, wireless accessories and other USB-powered electronics. Charging performance depends on the device, cable and rated output of the built-in USB module. Confirm the port format and output specification before use, especially for USB-C laptops, fast-charging protocols or equipment requiring higher wattage.

The outlet must be connected to a correctly designed final circuit with suitable overcurrent protection, earthing and residual-current protection where required by UAE authority regulations and the project design. Cable size, breaker rating, RCD or RCBO selection, circuit arrangement and maximum demand must be determined by a qualified electrical engineer or licensed electrician rather than from the socket rating alone.

Yes. Its double-outlet configuration, integrated USB charging and Classic Grey finish make it suitable for residential developments, hospitality interiors, office fit-outs and retail projects. For bulk specifications, contractors should confirm the model number BL262-G, finish sample, USB specification, back-box compatibility, accessory range and consultant approval so that all outlets match the approved electrical and interior design schedules.

It may be used in suitable indoor kitchen or utility locations when positioned away from sinks, water sources, heat and excessive moisture, and when installed in accordance with the applicable wiring rules and local authority requirements. The standard accessory should not be assumed to be weatherproof or splash-proof. Where an ingress-protection rating is required, use an appropriately rated enclosure or socket solution.

Isolate the electrical supply before inspection or cleaning. Wipe the faceplate with a soft, dry or lightly damp cloth and avoid abrasive pads, solvents, sprays or excessive water. Periodically check for discoloration, heat marks, loose mounting, damaged USB ports, unusual noise or intermittent power. If any defect is found, stop using the outlet and arrange inspection by a qualified electrician.

The ABB Inora BL262-G combines two commonly used 13A outlets and convenient USB charging in one coordinated wall accessory. This can reduce reliance on bulky charging adapters, improve bedside and workstation usability, and support a neat contemporary finish. Its Classic Grey colour is also suitable for modern UAE villas, apartments, offices, hotels and commercial fit-outs where coordinated electrical accessories are required.