ABB Inora 2 Gang 13A Double Pole Switched Socket Outlet with Illumination Classic Grey BL240-G

DP means double pole. Each double-pole switch is designed to disconnect both the live and neutral conductors when switched off, providing more complete isolation than a single-pole switch. Correct earthing and circuit isolation are still essential, and installation should be completed by a qualified electrician.

The neon indicators provide a convenient visual indication of the socket switch status. This can be useful in homes, offices, workshops, utility rooms and commercial spaces where users need to identify whether an outlet has been switched on. Indicator operation depends on correct wiring in accordance with the manufacturer's instructions.

This socket is intended for suitable indoor electrical installations, including villas, apartments, offices, retail units, staff accommodation, workshops and other construction projects. It can supply compatible appliances and equipment within the circuit and socket ratings. It should not be installed outdoors, in wet areas or in exposed locations unless it is housed within an appropriately rated weatherproof enclosure.

The 13A switched-socket format is widely used in UAE residential and commercial buildings. Project engineers should confirm that the product markings, technical documentation and installation method satisfy the applicable UAE electrical regulations, project specifications and requirements of the relevant local authority, such as DEWA, ADDC, SEWA or the authority having jurisdiction.

Before installation, isolate the circuit at the distribution board and verify that it is de-energised. A qualified electrician should connect the live, neutral and earth conductors to the clearly identified terminals, secure the conductors to the manufacturer's specified torque, fit the socket to a compatible back box and check that no wires are trapped. The circuit should then undergo continuity, insulation resistance, polarity, earthing and functional tests before energisation.

Use a back box that matches the socket's mounting pattern, overall dimensions and required wiring depth. The box must provide adequate space for cable bends, terminals and earth continuity without crushing or sharply bending conductors. Confirm the exact box dimensions and minimum depth from the ABB Inora technical data or approved project submittal before installation.

Both outlets may be used at the same time, provided the connected loads remain within the socket rating, circuit design capacity and protective-device limits. The 13A marking must not be interpreted as permission to overload the final circuit. High-load appliances, extension leads and multi-plug adaptors should be assessed carefully by a qualified electrician.

Do not select this socket solely because an appliance plug fits it. Air conditioners, water heaters, cookers and other high-load or fixed appliances may require a dedicated circuit, local isolator, fused connection unit or higher-rated accessory. The appliance manufacturer's instructions, calculated load, cable size and UAE project requirements should determine the correct connection method.

The socket circuit should have correctly selected overcurrent and earth-leakage protection based on the circuit type, cable size, installation method and applicable regulations. Proper earthing is mandatory. RCD or RCBO protection may be required depending on the location and governing electrical rules, so circuit design and testing should be handled by a qualified electrical professional.

Suitability depends on the installation zone and exposure to moisture, dust and heat. A standard indoor socket should not be exposed directly to water, condensation or outdoor weather. Kitchens, bathrooms, balconies, landscaping areas and construction-site locations may require additional separation, RCD protection or an accessory with a suitable IP rating. Always follow local regulations and project specifications.

Contractors should verify the model number BL240-G, Classic Grey finish, socket configuration, rated current, voltage and frequency markings, terminal capacity, back-box compatibility, applicable conformity markings and availability of technical documentation. The selected accessory should also match the project's wiring system, interior finish schedule and approved electrical material submittal.

Keep the faceplate clean and dry, using a soft cloth without abrasive or solvent-based cleaners. Periodically check for discoloration, cracking, unusual heat, buzzing, loose operation or damaged switches. If any defect is found, isolate the circuit and arrange inspection by a qualified electrician. Internal terminals should not be accessed while the circuit is energised.

The ABB Inora BL240-G combines two individually switched 13A outlets, double-pole switching, visible neon indication and a Classic Grey finish in one wall accessory. This configuration supports practical power access and coordinated interior design in UAE homes, offices and commercial developments, subject to correct specification, installation and regulatory approval.