ABB Inora 2 Gang 13A Double Pole Switched Socket Outlet with Illumination White BL240

Double-pole, or DP, switching disconnects both the live and neutral conductors when an outlet is switched off. This provides more complete local isolation than single-pole switching and is useful in buildings where enhanced control and electrical safety are required.

The neon indicator provides a visible status reference for the switched socket, helping users identify when electrical power is available at the outlet. This is particularly useful in kitchens, utility rooms, offices, workshops and other areas where equipment may remain connected.

Yes. Its 13A switched socket configuration is suited to the Type G plug system widely used in the UAE. The complete installation must still comply with applicable UAE electrical regulations, local authority requirements and project specifications, including those of the relevant emirate's electricity and water authority.

Yes. The ABB Inora 13A double socket can be specified for villas, apartments, offices, shops, hotels and other commercial interiors. Two switched outlets provide convenient power access while reducing the number of separate socket points required on a wall.

It can supply compatible plug-in appliances and equipment whose load is within the outlet and circuit ratings, such as televisions, computers, chargers, lamps and many common household or office appliances. High-load equipment should be checked against its nameplate current, and fixed or dedicated appliances may require a separate circuit or connection point.

Both outlets may be used simultaneously, provided the connected loads do not exceed the socket, wiring, protective device or final circuit capacity. A qualified electrician should assess expected demand, cable size, circuit protection and load diversity, especially in commercial or high-use locations.

Installation should be carried out with the circuit isolated and verified dead. A qualified electrician should fit the socket to a compatible double-gang back box, terminate live, neutral and earth conductors at the marked terminals, secure the faceplate and complete polarity, continuity, insulation and functional tests before energising the circuit.

A compatible double-gang wall box with suitable fixing centres and adequate internal depth is required. Back-box depth should allow safe conductor routing without compression, particularly where larger cables or multiple conductors are present. Confirm the BL240 dimensional drawing and project box specification before installation.

Yes. The protective earth conductor must be correctly connected to the designated earth terminal, and any metallic back box must be bonded where required by the applicable wiring rules. Earth continuity and polarity should be tested by a competent electrician before the outlet is placed into service.

This standard wall socket should not be assumed to be weatherproof because no IP rating is stated in the supplied product data. For gardens, balconies, wash areas, construction sites or other locations exposed to moisture and dust, use a suitably IP-rated enclosure or a purpose-designed weatherproof socket in accordance with local regulations.

It is primarily intended as a fixed wiring accessory for completed indoor installations. Temporary construction power systems usually require robust industrial equipment, suitable IP protection, appropriate distribution boards and residual-current protection. Selection should follow the site's risk assessment and UAE project safety requirements.

The required MCB or RCBO rating, RCD protection, cable size and earthing arrangement depend on the final circuit design and applicable local regulations. These must be selected by a qualified electrical professional; the socket's 13A outlet rating does not by itself determine the protective device rating for the complete circuit.

Switch off and isolate the circuit before inspection or maintenance. Clean the faceplate with a soft, dry or slightly damp cloth and avoid solvents, abrasive cleaners and direct water spray. Replace the unit if there are signs of overheating, cracking, loose switching, discoloration, arcing or damaged terminals.

The BL240 combines two 13A switched outlets, double-pole isolation, neon indication and a clean white finish in one wall accessory. These features make it a practical choice for UAE residential and commercial fit-outs where convenient Type G power access, individual outlet control and a coordinated interior appearance are required.