ABB Inora 1 Gang 13A Double Pole Switched Socket Outlet Royal Gold BL237-PG

DP means double pole. When the socket switch is turned off, it is designed to disconnect both the live and neutral conductors. This provides more complete isolation than a single-pole switch and is particularly relevant to electrical installations in the UAE, where double-pole switched outlets are commonly specified.

Yes, a 13A switched socket is widely used in UAE residential and commercial projects built around the British-style socket system. The final installation must comply with applicable UAE electrical regulations, project specifications and the requirements of the relevant local authority, such as DEWA, ADDC, SEWA or the authority having jurisdiction.

The socket can be used for compatible appliances and equipment whose connected load does not exceed the outlet, plug, circuit and manufacturer ratings. Typical applications include televisions, computers, lamps, chargers and suitable household or office appliances. High-load equipment must be checked by an electrician against its wattage, starting current and circuit capacity before connection.

It is suited to indoor locations such as villas, apartments, hotel rooms, offices, retail spaces and reception areas. The Royal Gold finish can complement premium decorative interiors and matching electrical accessories. For bathrooms, kitchens, outdoor areas or other damp and dusty locations, verify the required IP rating and local installation-zone rules before selection.

Installation should be completed by a licensed electrician. The supply must be isolated and proven dead before work begins. Conductors should be identified, connected to the marked live, neutral and earth terminals, tightened to the manufacturer's specified torque and arranged without damaging the insulation. The socket should then be secured to a compatible wall box, aligned and electrically tested before energisation.

Confirm the wall-box compatibility, wiring arrangement, circuit rating, cable size, earthing provision, terminal capacity and available box depth. Contractors should also check the approved material submittal, finish schedule, authority requirements and ABB installation documentation. Do not rely on appearance alone when replacing an accessory from another range.

Yes, protective earthing is essential for a 13A socket installation. The circuit protective conductor must be connected to the designated earth terminal in accordance with the wiring design and applicable regulations. If a metal wall box is used, it may also require bonding according to the installation method and local electrical requirements.

It may be suitable as a replacement where the existing wall box, wiring, circuit rating and mounting arrangement are compatible. Before replacement, an electrician should inspect conductor condition, polarity, earthing, box depth and terminal suitability. Any signs of overheating, loose wiring or damaged insulation must be corrected before the new socket is installed.

It can be installed in an appropriate indoor kitchen location when permitted by the electrical design and local rules. However, appliances such as ovens, water heaters, washing machines and other high-load equipment may require dedicated circuits, isolators or connection units. The appliance load and manufacturer's instructions must be reviewed by a qualified electrician.

It should not be assumed to be suitable for exposed outdoor use unless ABB documentation confirms the required ingress-protection rating. UAE outdoor environments can expose accessories to dust, heat, humidity and water. Outdoor installations should use a correctly rated weatherproof enclosure or an outdoor socket selected for the site's environmental conditions.

A qualified electrician should carry out the tests required by the project and applicable regulations, including protective-conductor continuity, insulation resistance, polarity and earth-fault protection checks. The switch operation and socket condition should also be inspected before the circuit is handed over for use.

Isolate the circuit before cleaning and use a soft, dry or slightly damp cloth. Avoid abrasive pads, solvents, acidic cleaners and harsh chemicals because they may damage the decorative finish or printed markings. Do not allow moisture to enter the socket, and arrange professional inspection if the accessory becomes loose, discoloured, cracked or unusually warm.

This ABB Inora socket combines a commonly specified 13A outlet format, double-pole switching and a decorative Royal Gold appearance. It is a practical option for UAE villas, hospitality interiors, offices and retail fit-outs where electrical functionality and coordinated finishing are both important. Final approval should always follow the consultant's specification and local authority requirements.