ABB Inora 1 Gang 13A Double Pole Switched Socket Outlet Starry Black BL237-885

DP means double pole. When operated, a double-pole switch is designed to disconnect both the live and neutral conductors, providing more complete local isolation than a single-pole switch. The protective earth remains connected. This arrangement is commonly specified for socket outlets in UAE construction and fit-out projects where enhanced isolation is required.

This socket is intended for compatible 13A, three-pin plug systems commonly used in the UAE. It can serve everyday equipment such as televisions, computers, lamps, chargers and suitable small appliances, provided the connected load does not exceed the socket rating or the circuit design limits. High-load or fixed appliances should follow the electrical consultant's approved connection schedule.

Yes, its 13A switched format is relevant to the plug system widely used in UAE villas, apartments, offices, hotels and retail fit-outs. Final selection and installation must comply with the project's approved specifications, applicable UAE electrical regulations and the requirements of the relevant local authority, such as DEWA, ADDC or the authority having jurisdiction.

Installation should be completed by a qualified electrician. The circuit must first be isolated, locked out where required and tested to confirm it is dead. The electrician should use a compatible wall box, terminate live, neutral and earth conductors at the marked terminals, tighten connections to the manufacturer's requirements, secure the socket without trapping cables and then perform the required continuity, polarity, insulation and functional tests before energising.

It may replace a compatible single-gang 13A socket if the wall box, fixing centres, box depth, wiring condition and circuit arrangement are suitable. The installer should check the existing conductors, earthing, protective device and available installation space before replacement. Do not assume compatibility solely from the front-plate appearance; verify the product dimensions and installation instructions supplied with the unit.

Use a back box compatible with the socket's mounting format and with enough depth for the mechanism, terminals and conductor bend radius. The exact box type and minimum depth should be confirmed from ABB's installation documentation or the physical product before wall preparation. Adequate space is especially important in construction projects using larger conductors or multiple cables in the same box.

The Starry Black finish is well suited to modern villas, offices, hotel rooms, restaurants, retail spaces and premium apartment interiors. It can coordinate with dark wall panels, joinery, stone finishes and contemporary electrical accessories. Designers should confirm the finish against project samples because colour appearance can vary with lighting and surrounding materials.

It should not be treated as weatherproof unless ABB documentation states a suitable IP rating for the complete installed assembly. For balconies, gardens, wash areas, kitchens near water sources or other damp locations, use an appropriately IP-rated enclosure or outdoor socket selected for the environmental conditions. Installation must also maintain required clearances and circuit protection under applicable UAE regulations.

Protection depends on the circuit design, cable size, installation method and local authority requirements. Socket circuits commonly require suitable overcurrent protection and residual-current protection, but the ratings must be determined by the project's electrical engineer or qualified electrician. The socket's 13A rating does not by itself define the MCB, RCBO, RCD or cable specification for the complete circuit.

Yes, it can be considered for residential construction, commercial MEP works, renovations and interior fit-outs requiring a single 13A double-pole switched outlet in a dark finish. Before bulk procurement, contractors should confirm the model number BL237-885, approved material submittal, finish sample, back-box compatibility, required certifications and consultant approval against the project's electrical schedule.

Switch off and isolate the circuit before inspection or deeper cleaning. Wipe the faceplate with a soft, dry or lightly damp cloth, and avoid abrasive pads, solvents, harsh chemicals and excessive water that could damage the finish or enter the mechanism. If the socket becomes loose, discoloured, unusually warm, noisy or intermittent, stop using it and arrange inspection by a qualified electrician.

Check the product name, ABB Inora range, model number BL237-885, 13A single-outlet configuration, double-pole switching requirement and Starry Black finish against the approved electrical schedule. Also verify the marked voltage and frequency, terminal capacity, physical dimensions, back-box requirements and compliance documentation from the product label or ABB technical literature before ordering or installation.