ABB Inora 1 Gang 13A Double Pole Switched Socket Outlet with Illumination Royal Gold BL238-PG

DP means double pole. When the socket is switched off, the switching mechanism isolates both the live and neutral conductors. This provides more complete isolation than a single-pole switch and is useful for fixed electrical installations where enhanced control and safety are required.

The integrated neon indicator provides a visible indication of the socket's operating status. It helps users identify whether power is switched on, which is particularly useful for appliances, office equipment, hotel rooms, kitchens and maintenance applications.

The socket's 13A format is relevant to UAE buildings that use standard three-pin 13A plugs and a nominal 230V, 50Hz electrical supply. Product suitability should still be confirmed against project specifications, the applicable UAE electrical authority requirements and any consultant-approved material schedule before installation.

This socket is suitable for indoor residential and commercial environments, including villas, apartments, offices, hotels, retail units and premium interior fit-outs. Typical uses include powering televisions, computers, lamps, chargers and other compatible appliances whose load does not exceed the socket or circuit rating.

It may be used only where the appliance current, plug, cable and final circuit are correctly rated and remain within the 13A socket limit. High-power equipment such as large water heaters, cookers, air-conditioning units and heavy construction machinery may require a dedicated isolator, industrial socket or separately designed circuit rather than a general-purpose 13A outlet.

Installation should be completed by a qualified electrician. The supply must be isolated and verified as dead before work begins. Live, neutral and earth conductors should be identified, terminated in the marked terminals, tightened to the manufacturer's requirements and arranged without damaging the insulation. The socket should then be secured level in a compatible wall box and electrically tested before energisation.

The electrician should confirm back-box compatibility and depth, conductor size, circuit protection, earthing continuity, polarity, insulation resistance and correct operation of the double-pole switch and neon indicator. The completed installation should comply with the relevant project drawings, local authority regulations and applicable wiring standards used in the UAE.

Yes. A protective earth connection is essential for a 13A socket outlet and must be securely terminated. The circuit protective conductor and any required metal back-box earth connection should be checked for continuity by a qualified electrician before the socket is placed into service.

It should not be assumed to be suitable for exposed outdoor, bathroom or wet-area installation unless the manufacturer's specified IP rating and the project's regulations confirm suitability. Outdoor and damp locations normally require a weatherproof enclosure or an appropriately IP-rated socket, together with suitable circuit protection.

Yes, the ABB Inora BL238-PG is relevant to villa construction, apartment developments, hotel projects, office fit-outs and renovation work where a decorative Royal Gold accessory is specified. Contractors should verify the model, finish, socket layout, wall-box requirements and consultant approval before ordering quantities for a project.

Circuit protection must be selected according to the cable size, circuit design, connected load and local electrical requirements. Suitable overcurrent protection and, where required, residual-current protection should be provided at the distribution board. The socket's 13A rating does not replace the need for correctly coordinated circuit protection.

Switch off the electrical supply before cleaning. Wipe the faceplate with a soft, dry or slightly damp cloth and dry it immediately. Do not use abrasive pads, solvents, acidic cleaners or strong chemicals because they may damage the Royal Gold surface, markings or neon indicator.

Buyers should verify the model number BL238-PG, 13A single-gang configuration, double-pole switching, neon indicator and Royal Gold finish. For construction projects, also confirm the required quantity, compatible back boxes, approved brand schedule, plug format, installation environment and compliance requirements specified by the consultant or relevant UAE authority.