ABB Inora 1 Gang 13A Double Pole Switched Socket Outlet with Illumination White BL238

DP means double pole. When operated, the socket switch controls both the live and neutral connections rather than switching only the live conductor. This provides more complete local isolation and is useful in residential, commercial and construction-related electrical installations where double-pole switching is specified.

The neon indicator illuminates when the socket is switched on, allowing users to check its operating status at a glance. This is particularly useful for fixed appliances, maintenance equipment, office devices and utility-area installations where clear power-status identification can improve convenience and operational safety.

The socket is intended for compatible 13A rectangular-pin plugs commonly used in the UAE. It can serve suitable household, office and light commercial equipment, provided the connected appliance and circuit remain within the socket's 13A rating. High-load equipment should be checked against its nameplate current and the circuit design before connection.

Its 13A switched format is relevant to UAE residential and commercial projects that use British-style socket systems. Before installation, the contractor should confirm compatibility with the approved project specification, applicable UAE electrical regulations and the requirements of the relevant local authority, such as DEWA, ADDC or the authority serving the project location.

Yes, it is suitable for appropriately designed indoor electrical installations in villas, apartments, offices, retail units and similar buildings. Common applications include bedrooms, living areas, offices, meeting rooms and utility spaces. Final suitability depends on the circuit rating, mounting system, environmental conditions and approved electrical drawings.

Installation should be completed by a qualified electrician. The circuit must first be isolated and verified as dead. The electrician should use a compatible mounting box, identify the live, neutral and earth conductors, connect them to the correctly marked terminals, tighten all terminals to the manufacturer's requirements and secure the faceplate without trapping or damaging cables. The circuit should then be inspected and electrically tested before energisation.

The electrician should check conductor termination, protective-earth continuity, polarity, insulation resistance and the operation of the double-pole switch and neon indicator. Applicable RCD or RCBO protection should also be tested where required by the circuit design and local regulations. Test results should be recorded as part of the project's inspection and commissioning documentation.

The product data does not state an IP rating, so it should not be assumed to be weatherproof or suitable for direct exposure to water, dust or outdoor conditions. Use in kitchens, bathrooms, balconies, plant areas or external locations must comply with applicable electrical-zone and ingress-protection requirements. A suitably rated weatherproof enclosure or dedicated IP-rated socket should be selected where environmental protection is required.

Cable size cannot be selected from the socket rating alone. It must be determined by a qualified electrical designer or electrician based on the circuit arrangement, protective-device rating, installation method, cable length, voltage drop, ambient temperature, grouping and other derating factors relevant to UAE conditions. The cable must also fit the socket terminals correctly without damaging or removing conductor strands.

It may be used on an appropriately designed ring or radial final circuit where permitted by the approved electrical design. The circuit configuration, cable capacity, protective device and number of connected outlets must comply with the project's specifications and applicable UAE authority requirements. Circuit modifications should not be made without proper load assessment and testing.

Double-pole switching provides local disconnection of both live and neutral conductors, which can support safer isolation and clearer equipment control. In construction projects, it is useful where specifications call for switched socket outlets serving appliances, office equipment or maintenance devices. It does not replace circuit isolation procedures, lockout practices or upstream protective devices during electrical work.

Only equipment whose operating current, starting current and plug configuration are compatible with the socket and its circuit should be connected. Heavy-duty construction tools, welders, large compressors and industrial machinery may require dedicated industrial sockets, higher-rated circuits or three-phase supplies. Contractors should verify each tool's electrical nameplate and the temporary-power design before use.

No. The neon indicator is only a convenient status display and must never be treated as proof that a circuit is safe to work on. Before maintenance, the circuit should be properly isolated, secured against reconnection and tested for absence of voltage using an approved test instrument and safe isolation procedure.

Keep the faceplate clean and dry, using a soft cloth without abrasive cleaners or excessive moisture. Periodically inspect it for discoloration, heat damage, cracks, loose mounting, buzzing, sparking or an unreliable switch. If any defect is found, stop using the outlet and arrange inspection by a qualified electrician; internal repairs should not be attempted by the user.