ABB Inora 1 Gang 13A Switched Universal Socket Outlet Classic Grey BL294-G

SP means single pole. A single-pole switch disconnects the live conductor when the socket is switched off, while neutral remains connected. The socket must be wired with correct live, neutral and earth connections by a qualified electrician in accordance with the project specification and applicable UAE electrical regulations.

Yes, the 13A rating makes this socket relevant to many UAE residential and commercial installations using nominal 220–240V AC power. However, the electrician or project consultant should confirm the socket's marked voltage, certification and compatibility with the applicable authority requirements, such as DEWA, ADDC, SEWA or the relevant local authority, before installation.

It can be used for compatible indoor appliances and equipment whose operating current and power demand remain within the socket, circuit and manufacturer ratings. Typical applications may include televisions, computers, chargers, lamps and small office or household appliances. High-load equipment must be checked carefully, and fixed heavy appliances should use the outlet type and dedicated circuit specified by the electrical design.

A universal socket is designed to accommodate several plug-pin configurations, but this does not guarantee compatibility with every plug type or appliance. Plug fit, earthing arrangement, voltage, frequency and equipment power requirements must all be verified. Never force a plug into the outlet, and use UAE-compliant plugs or approved adapters where required.

Installation should be completed by a licensed electrician. The supply must first be isolated and proven dead. The electrician should identify and connect the live, neutral and protective earth conductors to the correctly marked terminals, tighten them to ABB's specified torque, secure the mechanism in a compatible mounting box, fit the faceplate and complete polarity, earthing, insulation and functional tests before energising the circuit.

Confirm the approved electrical drawing, circuit rating, cable size, protective device, earthing arrangement, mounting-box dimensions, installation depth and final wall finish. Contractors should also check that the Classic Grey finish matches the approved material schedule and that the selected ABB Inora accessories are mechanically compatible. Product markings and project specifications should take precedence over assumptions based on appearance.

Yes. The protective earth terminal must be correctly connected wherever required by the wiring system and applicable regulations. The final circuit should have a correctly rated protective device, and residual-current protection should be provided where required by UAE authority rules, the project design or the installation location. Protection must be selected by a qualified electrical professional.

This product should not be assumed to be weatherproof or suitable for wet locations unless its official ABB documentation states an appropriate IP rating. In kitchens, bathrooms, balconies, gardens and outdoor construction areas, socket placement and enclosure protection must comply with the required electrical zones and local regulations. Use a suitable weather-resistant or higher-IP-rated outlet where moisture, dust or direct water exposure is possible.

It can be considered for indoor power points in villas, apartments, offices, hotels, retail units and other commercial fit-outs, subject to consultant approval and the electrical load schedule. Its single-gang universal format is useful where compatible plug flexibility is needed, while the Classic Grey finish suits contemporary interior specifications.

After completing the wiring, a qualified electrician should perform the tests required by the project and local regulations. These normally include protective-conductor continuity, insulation resistance, polarity, earth-fault protection and functional switching checks. The outlet should sit securely, terminals should be correctly tightened and there should be no exposed copper, overheating, looseness or abnormal operation.

Keep the socket dry and clean it only with a soft, dry cloth after isolating power where necessary. Do not use abrasive cleaners, solvents or excessive moisture. Arrange inspection by a qualified electrician if the socket becomes loose, discoloured, cracked, unusually warm, noisy or produces a burning smell. Damaged electrical accessories should be replaced rather than temporarily repaired.

Check the SKU 82178-NOS, model BL294-G, 13A rating, single universal socket configuration, SP switching and Classic Grey finish against the bill of quantities, approved material submittal and electrical drawings. For UAE construction projects, also verify the product datasheet, applicable conformity documentation, mounting compatibility and approval requirements of the consultant and local electrical authority.