ABB Inora 1 Gang 13A Switched Universal Socket Outlet White BL294

The key product details are a 13A current rating, single universal socket outlet, single-pole switching, white finish and ABB model number BL294. The final connected load must remain within the socket rating and the capacity of the supplying circuit. For voltage, dimensions, terminal capacity, ingress protection and certification details, installers should refer to the current ABB technical datasheet and project submittal.

The socket is suited to indoor electrical installations in villas, apartments, offices, shops, hotels and other commercial spaces where its configuration is accepted by the project consultant and local authority. It can serve compatible portable appliances and general electrical equipment within the rated load. It should not be treated as an industrial outlet or installed outdoors, in wet areas or in exposed locations unless suitable environmental protection is provided.

The BL294 may be used in UAE projects when it matches the approved electrical specification, authority requirements and consultant-approved material schedule. UAE fixed installations commonly use 230V, 50Hz supplies and BS 1363-type 13A socket systems, but requirements can vary by emirate, developer and project type. Confirm the universal outlet format, certification, circuit protection and socket location with the relevant authority and electrical consultant before procurement.

Installation must be performed by a qualified electrician with the circuit isolated, locked out where required and verified as de-energised. The installer should use a compatible flush or surface box, terminate the live, neutral and earth conductors at the marked terminals, tighten connections to ABB's specified torque, arrange conductors without damage and secure the accessory level with the wall. Circuit continuity, polarity, insulation resistance, earthing and protective-device operation should be tested before energising.

Cable size and protective-device rating must be selected according to the connected load, circuit arrangement, installation method, ambient temperature, grouping and applicable UAE wiring requirements. The 13A marking is the maximum socket rating and does not replace correct circuit design. The socket must be effectively earthed and supplied through appropriate overcurrent and residual-current protection where required by the authority, project specification or installation location.

Installation in kitchens, bathrooms, utility rooms or external areas requires careful assessment of moisture, splash zones, enclosure protection and mandatory separation distances. A standard indoor socket should not be exposed directly to water, dust, heat or weather. For outdoor or wet-area construction, use a suitably rated weatherproof enclosure or an IP-rated socket specifically approved for the location, together with the required RCD protection.

Only equipment whose plug, running current and starting demand are compatible with the socket and circuit should be connected. Fixed or high-load equipment such as large air conditioners, water heaters, cookers and pumps may require a dedicated circuit, double-pole isolator or higher-rated connection method rather than this single-pole 13A outlet. The equipment manufacturer's instructions and the electrical load schedule should determine the correct connection.

No. A universal aperture does not guarantee that every plug is electrically or mechanically suitable. Users must confirm the plug type, voltage, frequency, earthing arrangement and equipment rating before connection. Plugs should fit securely without forcing, loose adapters or exposed pins. For UAE construction projects, the consultant or authority may specify BS 1363 socket outlets instead of universal outlets, so approval should be obtained before installation.

Single-pole switching generally disconnects the live conductor while the neutral remains connected. Correct polarity is therefore essential for safe operation. Where project specifications or local requirements call for both live and neutral conductors to be isolated, a suitable double-pole socket or isolator should be selected instead.

Yes, it can be considered for new builds, fit-outs and renovation projects when it is compatible with the specified wall box, wiring system and approved accessory schedule. Contractors should check box depth, mounting centres, cable entry, wall finish and alignment before installation. For large projects, confirm that the model, colour and socket configuration match the approved sample and the rest of the ABB Inora wiring accessories.

Keep the faceplate clean and dry, using a soft cloth without abrasive cleaners or solvents. Periodically inspect it for discoloration, cracking, looseness, heat marks, buzzing or poor plug retention. Stop using the outlet and have a qualified electrician inspect it if any defect is found. Internal tightening, testing or replacement must only be carried out after safe electrical isolation.

Verify the model number BL294, required quantity, white finish, socket and switch configuration, wall-box compatibility, approved plug standard and project certification requirements. Also check the consultant's material submittal, electrical drawings, load schedule and local authority requirements. This helps ensure the ABB Inora universal socket is suitable for the intended UAE residential or commercial installation.