ABB Inora 2 Gang 13A Single Pole Switched Socket Outlet with Illumination White BL230

SP means single pole. Each switch controls the live conductor supplied to its corresponding socket outlet. The neutral and protective earth conductors remain connected in the normal manner. The circuit must be correctly isolated before installation or maintenance, and wiring should only be completed by a qualified electrician.

The neon indicators provide a convenient visual reference showing when the individual socket switches are in the ON position. This is useful in homes, offices, workshops and construction facilities because users can quickly identify whether power has been switched on without disconnecting the appliance.

The 13A socket format is relevant to the UAE market, where Type G plugs and British-style socket systems are widely used. Suitability for a specific project should be confirmed against the approved electrical drawings, project specifications and requirements of the relevant UAE authority, such as DEWA, ADDC, SEWA or the applicable local electricity provider. The contractor should also verify the product's required certification and compliance documentation before project approval.

Yes, both outlets can be used simultaneously, provided the connected appliances and circuit remain within the socket assembly's rating, circuit design capacity and protective-device limits. The 13A marking should not be interpreted as permission to overload the final circuit. High-load equipment must be assessed by a qualified electrician, particularly when extension leads or multiple appliances are involved.

First isolate and lock off the electrical supply, then verify that the circuit is dead using an approved tester. A qualified electrician should identify the live, neutral and earth conductors, connect them to the clearly marked terminals, tighten each terminal to the manufacturer's specified torque and ensure that no bare conductor is exposed. The socket is then aligned and secured to a compatible back box without trapping or damaging the cables. After installation, the circuit should be tested for protective-conductor continuity, insulation resistance, polarity and correct operation before energisation.

A compatible double-gang back box with suitable fixing centres and adequate depth is normally required. The correct box depth depends on cable size, conductor count, terminal space and whether the installation is flush or surface mounted. Contractors should confirm the BL230 dimensions and fixing requirements from the ABB technical documentation before preparing blockwork, drywall or wall finishes.

It can be specified for indoor power points in villas, apartments, offices, retail spaces, schools, staff accommodation and other commercial or residential buildings. Typical applications include general appliance outlets, workstation areas, bedrooms, living spaces and service rooms. Placement should follow the electrical layout, accessibility requirements, furniture coordination and the project's approved mounting heights.

This standard socket should not be assumed to be weatherproof or suitable for wet locations unless ABB documentation confirms the required IP rating. Outdoor areas, bathrooms, wash zones and other damp locations require accessories and enclosures selected for the applicable environmental conditions and installation zone. In UAE outdoor environments, additional consideration should be given to heat, humidity, dust, direct sunlight and water exposure.

Yes. The protective earth conductor must be correctly terminated and verified as part of the installation tests. The final circuit must also have correctly rated overcurrent protection and any residual-current protection required by the project specification and applicable UAE electrical regulations. Circuit design, cable sizing and protective-device selection must be carried out by a competent electrical professional.

It is intended for compatible 13A Type G plugs commonly used in the UAE. Appliances with other plug types should only be connected through an approved, correctly rated adaptor where permitted. Never force incompatible pins into the socket, defeat safety shutters or use a damaged plug, as this may cause poor contact, overheating or electric shock.

Keep the faceplate clean and dry, using a soft cloth after switching off and isolating the circuit where necessary. Do not apply solvents, abrasive cleaners or excessive water. Arrange inspection by a qualified electrician if there is discoloration, cracking, looseness, buzzing, a burning smell, intermittent operation, unusual heat or a neon indicator that behaves abnormally.

Contractors should verify the model number BL230, 13A rating, single-pole switching arrangement, double-outlet configuration, neon indication, finish, back-box compatibility and required installation environment. They should also review ABB's current technical data, product certification, authority approval requirements, project specifications, load schedules and approved material submittals before procurement and installation.