ABB Inora 2 Gang 2 Way 10AX Switch Royal Gold BL106-PG

The BL106-PG combines two lighting controls in one wall position, supports flexible two-location switching and provides a coordinated royal gold appearance. It is useful for contractors and interior fit-out teams seeking an ABB-branded decorative switch for villas, apartments, hotels, offices and other UAE projects. Final selection should be coordinated with the approved wiring accessories schedule and matching Inora components.

Keep the circuit isolated and have an electrician verify the common and traveller connections at both switching locations. Incorrect terminal placement, a loose conductor, a damaged cable, an incompatible paired device or a fault at the light fitting can prevent correct operation. Electrical testing should be completed before replacing the switch or restoring power.

Isolate the supply before cleaning and wipe the surface gently with a soft, dry or slightly damp cloth. Avoid abrasive pads, solvents, acidic cleaners and aggressive construction chemicals that may damage the decorative finish. During painting, plastering and final fit-out, protect the switch from dust, wet materials and impact, but do not energise it while covered.

The ABB Inora BL106-PG is primarily specified for lighting control. It should not automatically be used to control socket outlets, water heaters, air-conditioning equipment, pumps or other heavy loads. Such equipment may require a higher-rated double-pole switch, isolator, contactor or dedicated control device selected according to the equipment current and starting characteristics.

Use a compatible flush or surface back box with sufficient depth for the switch mechanism, terminals and safe conductor bending. During blockwork, plastering or gypsum-board installation, the box should be level, firmly fixed and positioned flush with the finished wall. Confirm the switch dimensions and fixing centres before closing walls or ordering back boxes for a project.

This decorative indoor switch should not be assumed to be weatherproof or suitable for direct exposure to rain, water or heavy dust unless ABB documentation states an appropriate IP rating. In bathrooms, utility areas, balconies or outdoor UAE environments, the installation zone and required ingress protection must be checked. Use a suitably rated weatherproof enclosure or switch where environmental protection is required.

For construction specifications, buyers should verify the product documentation and approvals applicable to the project. Switches for household and similar fixed electrical installations are commonly assessed with reference to IEC or BS EN 60669-1, while the completed installation must comply with the electrical regulations and approval requirements of the relevant UAE authority. Always confirm certificates and consultant requirements before procurement.

The switch is intended for fixed lighting-control applications, but suitability must be confirmed against the project's voltage, load schedule, approved product requirements and local authority regulations. UAE projects should follow the relevant rules of the applicable authority, such as DEWA or the authority serving the project location, together with recognised low-voltage installation practices. Installation and testing should be performed by a licensed electrician.

The ABB Inora BL106-PG is a wall-mounted electrical switch featuring two independently operated gangs, a two-way switching configuration and a 10AX rating. Its royal gold finish is designed to complement premium residential, hospitality and commercial interiors. The switch is suitable for controlling two separate lighting circuits from one location or, when paired with compatible two-way switches, from two different locations.

A conventional mechanical light switch normally interrupts the live conductor and does not require a neutral connection at the switch itself. However, the exact wiring arrangement depends on the circuit design and whether other devices are installed in the same box. Never assume conductor functions from colour alone; a competent electrician should identify and test every conductor.

Installation should begin by isolating and verifying the electrical supply. A qualified electrician should confirm the back-box compatibility, identify the supply and traveller conductors, connect each gang according to the terminal markings, tighten terminals to the manufacturer's requirements and secure the switch without trapping cables. The circuit should then be tested for polarity, continuity, insulation resistance and correct two-way operation before energising.

A two-way switch can normally be wired for one-way control by using the common terminal and one switched terminal for each gang. This provides installation flexibility when only one control point is required. Terminal identification and the ABB wiring instructions should always be checked before connection.

This configuration is widely used in UAE villas, apartments, hotels, offices and retail interiors. Typical applications include controlling two lighting zones in a room, operating corridor and staircase lights from opposite ends, or providing bedside and entrance control in bedrooms. Its royal gold finish is particularly relevant to decorative fit-outs and premium interior schemes.

The switch can generally be used for standard switched LED lighting circuits when the total connected load and LED driver characteristics remain within the switch rating. LED drivers can create high inrush current, so large groups of fittings should be assessed by a qualified electrician. For dimmable LED installations, use a compatible LED dimmer rather than this standard on-off switch.