ABB Inora 2 Gang 45A Double Pole Cooker Control Unit with 13A Switched Socket and Illumination Starry Black BL118-885

The 45A rating refers to the cooker control switch used to isolate the dedicated electric cooker or cooking appliance circuit. The 13A rating applies to the integrated socket outlet, which is intended for a compatible plug-connected appliance within its rated load. These are distinct functions, and neither outlet should be operated beyond its specified electrical rating.

It is intended for applications compatible with the UAE's commonly used 230V, 50Hz low-voltage supply and 13A plug-and-socket format. Final suitability must be confirmed against the appliance load, project specifications, local authority requirements and the regulations of the relevant UAE utility or jurisdiction, such as DEWA, ADDC, SEWA or the applicable local authority.

It may be used with electric cookers, ovens or hobs when the connected appliance load, cable size, circuit protection and manufacturer instructions are compatible with a 45A control unit. Some built-in ovens use a 13A connection, while high-power hobs and freestanding cookers often require a dedicated circuit. The appliance nameplate and electrical design must therefore be checked before installation.

Normally, the cooker is connected through the dedicated high-current cooker circuit controlled by the 45A switch, while the integrated 13A socket is used for a separate plug-connected appliance. The socket must not be treated as a substitute connection for a cooker that requires a dedicated high-load supply.

Installation should be completed by a licensed electrician. The supply must be safely isolated and verified as dead before work begins. The electrician should confirm the correct back box, conductor size, terminal identification, earthing, circuit protective device and tightening torque in accordance with ABB instructions and the approved electrical drawings. After installation, continuity, insulation resistance, polarity, earth-fault protection and functional operation should be tested before energising the circuit.

Cable size and circuit protection cannot be selected from the switch rating alone. They depend on the appliance demand, installation method, cable length, ambient temperature, grouping, voltage drop and applicable derating factors. A qualified electrical engineer or electrician should calculate the circuit and select an appropriate MCB or RCBO and cable in accordance with the UAE project requirements and the current wiring regulations adopted by the relevant authority.

The unit should be installed in an accessible location where the cooker supply can be isolated quickly, while maintaining safe clearance from direct heat, steam, water and cooking splashes. It should not be positioned directly above a hob unless specifically permitted by the approved kitchen and electrical design. Mounting height and location should follow the project drawings, appliance manufacturer's guidance and local authority requirements.

The correct wall box depends on the unit's plate format, terminal depth and wiring space requirements. Before first-fix construction work, verify the manufacturer's dimensional drawing and specified back-box type. A box with adequate depth is particularly important for high-current cooker cables, as overcrowding or sharply bending conductors can lead to poor termination, installation difficulty and overheating.

Yes. The Starry Black finish complements dark cabinetry, black appliances, stone worktops and contemporary kitchen interiors commonly used in UAE apartments, villas and hospitality developments. For a coordinated appearance, check that surrounding ABB Inora switches and sockets use the same finish and product range.

Yes. It is suitable for new-build and refurbishment projects when included in the approved electrical layout and load schedule. Contractors should coordinate the cooker point with the kitchen supplier, appliance schedule, wall finishes, joinery, worktop position and first-fix back box before closing the wall. This helps prevent clashes and ensures the control remains accessible after the kitchen is installed.

Confirm the model number BL118-885, 45A cooker-control requirement, integrated 13A socket requirement, Starry Black finish, wall-box compatibility and appliance circuit design. Buyers should also verify project-approved brands, required compliance documentation and compatibility with other ABB Inora wiring accessories used on site.

The electrician should inspect conductor terminations, earthing, polarity, protective-device coordination and the condition of the wall box and faceplate. Electrical testing should be completed and recorded as required by the project and local regulations. The switch and socket should be checked for secure operation, and the area should be monitored for unusual heat, odour, discoloration, buzzing or intermittent power during use.

Switch off or isolate the circuit before cleaning. Use a soft, dry or lightly damp cloth and avoid abrasive pads, solvents, strong chemicals or spraying liquid directly onto the unit. Periodic electrical inspection is recommended, particularly in heavily used kitchens. If the plate becomes hot, cracked, loose or discoloured, stop using the circuit and arrange an inspection by a qualified electrician.

The installed assembly should meet the applicable UAE authority regulations, approved project specifications and relevant wiring-accessory standards. Cooker control units are commonly specified with reference to standards such as BS 4177, while 13A socket outlets are commonly associated with BS 1363 requirements. Buyers and consultants should verify the exact ABB product certification and approval documents required for their project before procurement.